IS200BICLH1B 具有DCS和以太网通信

IS200BICLH1B是为Mark VI系列设计的印刷电路板。该系列是通用电气Speedtronic系列的一部分，该系列自20世纪60年代以来一直管理蒸汽或燃气轮机系统。Mark VI采用基于windows的操作界面。它具有DCS和以太网通信。

IS200BICLH1B是桥接接口板。它提供了桥接人格接口板(如BPIA/BPIB)和创新系列驱动的主控板之间的接口。该板具有一个MA检测输入，电压为24-115 V ac/dc，负载为4-10毫安。

联系电话：18059884797

立即咨询在线留言

产品详情

IS200BICLH1B 具有DCS和以太网通信

【功能描述】

IS200BICLH1B采用面板制造。这个狭窄的黑色面板上刻有板id号，制造商的标志，并有一个开口。电路板底部三分之一处标有“只能安装在5号槽位”。这块电路板由四个继电器构成。每个继电器的上表面都印有继电器图。该板也有一个串行1024位内存设备。该板不包括任何保险丝，测试点，led或可调硬件。

IS200BICLH1B在未通电的情况下，如果调整、拆卸或插入单板上的连接，可能会损坏单板。处理注意事项和更换程序参见GEI-100264。

IS200BICLH1B 具有DCS和以太网通信

The IS200BICLH1B is a printed circuit board designed for the Mark VI series. The series is part of the General Electric Speedtronic family, which has been managing steam or gas turbine systems since the 1960s. Mark VI uses a Windows-based interface. It has DCS and Ethernet communication.

IS200BICLH1B is a bridge interface board. It provides the interface between the bridge personality interface board (such as BPIA/BPIB) and the innovative series driven master control board. The board has an MA detection input with a voltage of 24-115 V ac/dc and a load of 4-10 mA.

The IS200BICLH1B is manufactured with a panel. This narrow black panel is engraved with the board id number, the manufacturer's logo, and has an opening. The bottom third of the board is marked "Install in slot 5 only." The circuit board consists of four relays. Relay drawings are printed on the upper surface of each relay. The board also has a serial 1024-bit memory device. The board does not include any fuses, test points, leds or adjustable hardware.

The IS200BICLH1B may be damaged if you adjust, remove, or insert the connections on the board when the board is not powered on. For the precautions and replacement procedure, see GEI-100264.