DS200SDCCG4A GE驱动器控制板 对静电高度敏感

DS200SDCCG4A  GE驱动器控制板 对静电高度敏感

DS200SDCCG4A 技术指标

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SDCCG4A

产品类型 驱动控制卡

产品描述

GE驱动器控制板DS200SDCCG4A是驱动器的主控制器。GE驱动控制板DS200SDCCG4A装有3个微处理器和RAM，可由多个微处理器同时访问。GE驱动控制板DS200SDCCG4A包含EPROM芯片，必须从有缺陷的板上卸下并安装在更换板中。其中四个包含出厂时为电路板定义的配置文件。一个包含站点为电路板的特定功能定义的配置文件。因此，当您更换电路板时，必须小心地将 EPROM 从旧电路板换到更换电路板。

一个考虑因素是DS200SDCCG4A EPROM对静电高度敏感，可能会丢失存储在其上的信息。确保佩戴腕带以排出板上或身体上存在的任何静电。腕带可以夹在工作台或其他金属结构上的裸露金属表面上。其他腕带设计有插入式连接器，您可以将其连接到工作台上的连接器。另一个做法是始终将DS200SDCCG4A电路板放在您收到它的保护袋中。袋子可保护电路板免受静电影响。

另一种做法是在从袋子中取出保护板并将其安装到驱动器中之前，将保护袋接触金属表面。将保护袋压平在平坦的表面上，然后将EPROM安装在新板上的连接器中。

The GE driver control board DS200SDCCG4A is the main controller of the driver. The GE drive control board DS200SDCCG4A is equipped with three microprocessors and RAM, which can be accessed by multiple microprocessors simultaneously. The GE drive control board DS200SDCCG4A contains an EPROM chip, which must be removed from the defective board and installed in the replacement board. Four of them contain configuration files defined for the circuit board at the factory. A configuration file that contains specific functional definitions for the circuit board defined by the site. Therefore, when you replace a circuit board, you must carefully replace the EPROM from the old circuit board to the replacement circuit board.

One consideration is that the DS200SDCCG4A EPROM is highly sensitive to static electricity and may lose the information stored on it. Ensure to wear a wrist strap to discharge any static electricity present on the board or body. Wrist straps can be clamped onto exposed metal surfaces on workbenches or other metal structures. Other wristbands are designed with plug-in connectors that you can connect to the connectors on the workbench. Another approach is to always place the DS200SDCCG4A circuit board in the protective bag you received. The bag can protect the circuit board from static electricity.

Another approach is to contact the protective bag with the metal surface before removing the protective plate from the bag and installing it into the drive. Press the protective bag flat on a flat surface, and then install the EPROM in the connector on the new board

关于DS200SDCCG4A的常见问题

DS200SDCCG4A用于哪些应用？

DS200SDCCG4A 用于 TC2000 涡轮机应用。DS200SDCCG4A和其他G4A版本的SDCC与G1A版本相同，只是DS200SDCCG4A具有更大的EE参数存储区域和不同的固件。

DS200SDCCG4A上的三个微处理器是什么？

DS200SDCCG4A 具有驱动控制处理器 （DCP），DS200SDCCG4A 具有电机控制处理器，DS200SDCCG4A 具有协电机处理器 （CMP）。

DS200SDCCG4A 有什么样的电线？

DS200SDCCG4A 具有伯格型跳线，DS200SDCCG4A 具有跳线。DS200SDCCG4A 上的伯格型跳线由 JP 命名法标识。DS200SDCCG4A上的跳线由WJ命名法标识