DS200SDCIG2ABB 直流电源模块 用于现场控制系统

DS200SDCIG2ABB  直流电源模块 用于现场控制系统

DS200SDCIG2ABB 技术指标

制造者通用电气通用电气

系列马克五世

部件号DS200SDCIG2ABB

产品类型SDCI直流电源和仪表板

产品描述

GE 直流电源和仪表板 DS200SDCIG2ABB 用作 DC2000 驱动器的接口。无论何时安装、拆卸、排除故障或修理DS200SDCIG2ABB，该过程只能由合格的人员执行。该人员必须了解如何在高压设备周围工作，例如电路板和安装它的驱动器。此人应具有安装和维修特定驱动器和主板的经验。由于每个安装都不同，电源、控制信号、接地线和通信电缆的电气布线设计独特，因此最好确保服务人员或安装人员具有安装经验。

有经验的安装人员或服务人员在尝试安装新主板之前，应始终注意旧主板上的跳线设置和布线。这样，安装人员或服务人员可以快速将跳线设置从旧板传输到新板，以复制确切的配置。如果替换板是同一板的较新版本，则外观可能不同。它可能具有不同的组件，并且连接器、跳线、保险丝、LED 和其他硬件的位置可能不同。

请注意，即使DS200SDCIG2ABB看起来不同并且是不同的版本，主板之间也会保持兼容性。也就是说，驱动器的性能不会受到主板版本更改的影响。只要所有跳线都设置在新板上，就像在旧板上一样，情况就是如此。

The GE DC power supply and instrument panel DS200SDCIG2ABB are used as interfaces for the DC2000 driver. Whenever installing, disassembling, troubleshooting, or repairing DS200SDCIG2ABB, this process can only be carried out by qualified personnel. The personnel must understand how to work around high-voltage equipment, such as circuit boards and the drivers that install them. This person should have experience in installing and repairing specific drives and motherboards. Due to each installation being different, the electrical wiring design for power, control signals, grounding wires, and communication cables is unique, so it is best to ensure that service or installation personnel have installation experience.

Experienced installers or service personnel should always pay attention to the jumper settings and wiring on the old motherboard before attempting to install a new one. In this way, installers or service personnel can quickly transfer jumper settings from the old board to the new board to copy the exact configuration. If the replacement board is a newer version of the same board, the appearance may be different. It may have different components, and the positions of connectors, jumpers, fuses, LEDs, and other hardware may be different.

Please note that even if DS200SDCIG2ABB looks different and is of different versions, compatibility will still be maintained between motherboards. That is to say, the performance of the drive will not be affected by changes to the motherboard version. As long as all jumpers are set on the new board, just like on the old board, this is the case.

DS200SDCIG2ABB常见问题

如何去除DS200SDCIG2ABB？

DS200SDCIG2ABB由塑料支架固定到位。要卸下 DS200SDCIG2ABB，请在断开所有电缆与 DS200SDCIG2ABB 的连接后，将这些支架推回。

DS6SDCIG200ABB 上的保险丝“FU2”用于什么？

DS6SDCIG200ABB 上的保险丝“FU2”是用于内部 NRX 10 A 现场和/或 MOV 组件的保险丝。DS6SDCIG200ABB 上的保险丝“FU2”工作电流为 15 安培。