IS420UCSDH1A 许多应用程序和固件

IS420UCSDH1A技术指标

储存温度-40至85°C(-40至185°F)

系列mark VIe

处理器类型四核，1.6 GHz AMD v1000系列

部件编号is420ucsdh1a

安装方向垂直安装

手册geh -6855卷一、二

输入电压24/28 VDC

功能缩写uscd

扩展工作高度1000-3000米

联系电话：18059884797

立即咨询在线留言

产品详情

IS420UCSDH1A 许多应用程序和固件

【功能描述】

四核1.6 GHz AMD v1000系列处理器控制器IS420UCSDH1A是通用电气生产的Mark VIe系列的一部分。这个特定的控制器被标记为Mark VIe控制器，使其类似于UCSC控制器，如果不是几乎相同的话。由于两个控制器都是Mark VIe四核控制器，这表明UCSD控制器还配备了具有实时管理程序技术的QNX Neutrino实时多任务能力的操作系统。这些应用允许IS420UCSDH1A控制器运行高可靠的高速工业应用。通过这些应用程序，控制器还能够应用Predix基于云的应用程序和嵌入式现场代理技术，从而通过安全的web应用程序传输实时数据。

配备IONet的IS420UCSDH1A控制器可以运行Mark VIe系列的许多应用程序和固件，请注意，虽然IONet用于不同的应用程序，但它只能支持Mark控制I/O包和控制器。当控制器使用IONet接口时，可以将外部数据传输到系统数据库或从系统数据库传输出去。

由于该控制器类似于UCSC控制器，它可以与ControlST V07.01软件一起使用，并可用于TMR(三模冗余)单工和双冗余应用。该控制器还具有三个平台配置支持的功能，这些功能是EFA，嵌入式PPNG和嵌入式EtherCAT配置。IS420UCSDH1A控制器有六个以太网端口，其中五个在前面板上，其中一个在底部，允许Predix连接。

IS420UCSDH1A 许多应用程序和固件

The quad-core 1.6GHz AMD v1000 series processor controller IS420UCSDH1A is part of the Mark VIe series produced by General Electric. This particular controller is labeled a Mark VIe controller, making it similar to, if not nearly identical to, a UCSC controller. Since both controllers are Mark VIe quad-core controllers, this indicates that the UCSD controller is also equipped with the QNX Neutrino real-time multitasking operating system with real-time hypervisor technology. These applications allow the IS420UCSDH1A controller to operate highly reliable, high-speed industrial applications. Through these applications, controllers are also able to apply Predix cloud-based applications and embedded field agent technology to transfer real-time data through secure web applications.

The IS420UCSDH1A controller equipped with IONet can run many applications and firmware from the Mark VIe family, note that while IONet is used for different applications, it can only support Mark control I/O packages and controllers. When the controller uses the IONet interface, external data can be transferred to or from the system database.

Since the controller is similar to a UCSC controller, it can be used with the ControlST V07.01 software and can be used in TMR(three-mode redundancy) simplex and dual-redundancy applications. The controller also has features supported by three platform configurations, which are EFA, embedded PPNG, and Embedded EtherCAT configurations. The IS420UCSDH1A controller has six Ethernet ports, five of which are on the front panel and one of which is on the bottom, allowing Predix connectivity.