IS420UCSBH3A 具有可靠运行所需的特定位置认证

is420ucshbh3a技术规范

型号is420ucshbh3a

电线尺寸28至16 AWG

体重约。2.9磅

处理器类型1200mhz EP80579 Intel

工作温度0 ~ 65℃

制造商通用电气

输入电压24/28 VDC

功能缩写ucsb

尺寸高6.4英寸x宽8.1英寸x深1.4英寸

联系电话：18059884797

立即咨询在线留言

产品详情

IS420UCSBH3A 具有可靠运行所需的特定位置认证

【功能描述】

is420ucshbh3a控制器是通用电气生产的Mark VIe系列UCSB控制器的另一个版本。该控制器在GEH-6725 Mark VIe和Mark VIe控制设备HazLoc指令指南中被描述为Mark VIe或MarkStat控制器。本设备采用1200mhz的Intel EP80579微处理器。该控制器与Mark VIe系列中的UCSC控制器非常相似，虽然两个控制器具有不同的硬件形式，但两个控制器上的软件形式几乎相同。这样的控制器的一些优点是缺乏电池和风扇以及缺乏所需的跳线设置。

is420ucshbh3a控制器前板上有多种led，其中有:

OT显示琥珀色，当内部组件已超过建议的限制

“ON”表示恢复进程的状态

当控制器被选择为设计控制器时，直流显示实心绿色LED

ONL，当控制器在线并运行应用程序代码时，它将显示为绿色

所有上述列出的led都用于指示控制器状态，这些led的信息可以在GEH-6855卷I标记VIeS功能安全系统系统指南第八章中找到，特别是在第一百五十九和一百六十页。

该控制器还具有可靠运行所需的特定位置认证和标准。当安装在I类，2分部，A, B, C或D组时，is420ucshbh3a控制器需要ANSI/ISA-12.12.01-2015或CAN/CSA-C22.2 No. 213-15标准。有关不同位置标准的更多信息，请参阅GEH-6725 HazLoc指令指南。

IS420UCSBH3A 具有可靠运行所需的特定位置认证

The is420ucshbh3a controller is another version of the Mark VIe series of UCSB controllers produced by General Electric. The controller is described as a Mark VIe or MarkStat controller in the GEH-6725 Mark VIe and Mark VIe Control Device HazLoc Directive Guidelines. The device uses the 1200mhz Intel EP80579 microprocessor. The controller is very similar to the UCSC controller in the Mark VIe series, and while the two controllers have different hardware forms, the software forms on both controllers are almost identical. Some of the advantages of such a controller are the lack of batteries and fans and the lack of required jumper Settings.

The is420ucshbh3a controller has a variety of leds on the front board, including:

OT displays amber when internal components have exceeded the recommended limit

ON indicates the status of the recovery process

When the controller is selected as the design controller, the DC displays a solid green LED

ONL, when the controller is online and running the application code, it will appear green

All of the leds listed above are used to indicate controller status, and information on these leds can be found in Chapter VIII of the System Guide for Labeled VIeS Functional Safety Systems in volume GEH-6855 I, especially on pages 159 and 160.

The controller also has the site-specific certifications and standards required for reliable operation. When installed in Class I, Division 2, Group A, B, C, or D, is420ucshbh3a controllers require ANSI/ISA-12.12.01-2015 or CAN/CSA-C22.2 No. 213-15 standards. For more information on the different location standards, see the GEH-6725 HazLoc Instruction Guide.