DS200SDCIG1AFB 电压源模拟输出模块 用于读取接近度和振动信息

DS200SDCIG1AFB 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SDCIG1AFB

产品类型 SDCI直流电源和仪表板

产品描述

GE 直流电源和仪表板 DS200SDCIG1AFB 用作 DC2000 驱动器的接口。在请求更换主板之前，您应该遵循标准程序。如果您认为损坏或有缺陷的电路板处于完美的工作状态，这些程序可以节省时间和金钱。首先通过执行标准关机程序断开驱动器的所有电流，然后卸下电源的保险丝以确保断开所有电源。等待一段时间，让所有电流离开驱动器和电路板。如果您在现场有标准测试设备，请使用它来测试电容器中剩余的电流。

检查DS200SDCIG1AFB 主板并注意所有电缆的连接位置。打开将主板固定在驱动器中的闩锁，然后小心地从驱动器中卸下主板。如果带状电缆连接到电路板，请将手放在电路板上的塑料连接器和带状电缆上，然后将它们拉开。尽量不要对带状电缆本身施加压力。某些电缆卡入主板上的连接器。用指甲分开连接器上的锁定卡舌，然后轻轻卸下电缆。卸下将电线固定到板上的所有螺钉，并保存螺钉以备将来使用。

反转该过程并将所有电缆和电线重新连接到DS200SDCIG1AFB 电路板。确保所有电缆都牢固地压入到位，所有螺钉都拧紧，并且连接器之间没有可见的空间。

The GE DC power supply and instrument panel DS200SDCIG1AFB are used as interfaces for the DC2000 driver. Before requesting a replacement motherboard, you should follow standard procedures. If you believe that a damaged or defective circuit board is in perfect working condition, these programs can save time and money. Firstly, disconnect all current from the drive by executing the standard shutdown program, and then remove the fuse from the power supply to ensure that all power is disconnected. Wait for a period of time to allow all current to leave the driver and circuit board. If you have standard testing equipment on site, please use it to test the remaining current in the capacitor.

Check the DS200SDCIG1AFB motherboard and pay attention to the connection positions of all cables. Open the latch that secures the motherboard in the drive, and carefully remove the motherboard from the drive. If the ribbon cable is connected to the circuit board, place your hand on the plastic connector and ribbon cable on the circuit board, and then pull them apart. Try not to apply pressure to the ribbon cable itself. Some cables are stuck into connectors on the motherboard. Use your nails to separate the locking tab on the connector and gently remove the cable. Remove all screws that secure the wires to the board and save the screws for future use.

Reverse the process and reconnect all cables and wires to the DS200SDCIG1AFB circuit board. Ensure that all cables are firmly pressed into place, all screws are tightened, and there is no visible space between the connectors

DS200SDCIG1AFB 常见问题

DS200SDCIG1AFB 为 DC2000 硬盘提供什么？

DS200SDCIG1AFB 为输入电压高达 2000 VAC 的 DC600 驱动器提供逻辑电源和接口电路。

如何分解 DS200SDCIG1AFB 型号？

要分解DS200SDCIG1AFB，请从DS200SDCIG1AFB的第一部分“DS200SDCI”开始，这是DS200SDCIG1AFB标识印刷线路板的基号。DS200SDCIG1AFB中的“G”后跟基数，表示一组，该组是特定板的变体，在本例中为直流电源和仪表板。1后跟G表示DS200SDCIG1AFB是“G1”版本的SDCI。DS200SDCIG1AFB型号中的以下字符表示DS200SDCIG1AFB板的修订级别。