369-HI-R-0-F-0-0-E 继电器

联系电话：18059884797

立即咨询在线留言

产品详情

369-HI-R-0-F-0-0-E 继电器

【功能描述】

369-HI-R-0-F-0-0-E技术规范

保险丝3.15 A H 250v (5 × 20mm)

接地电流输入频率20 ~ 100hz

工作范围-40°F至+140°F

相电流二次输入1a和5a

污染程度ii

RTD输入3根线，100根Ω铂，100根Ω镍，120根Ω镍，10根Ω铜

存储范围-40°F至+176°F

产品描述

GE Multilin 369-HI-R-0-F-0-0-E继电器旨在为三相电机和相关系统提供保护，同时还提供监控选项。该装置具有多种内置功能，包括客户过载曲线，内置RTD输入，光纤端口和增强的诊断。

369-HI-R-0-F-0-0-E上的显示器允许用户访问单元位置的警报和跳闸，并允许现场编程设定点。显示屏包括四个led，用于指示何时启动输出以及相应的状态指示灯led。12键键盘包括一个帮助键访问预编程的帮助屏幕。该装置由阻燃外壳保护。

369-HI-R-0-F-0-0-E的背面包括12个内置RTD输入。这些是字段可选的。该装置有四个输出继电器，一个客户可访问的保险丝，数字输入，RS485端口和模拟输出，以及在恶劣环境下使用的光纤数据链路。

369-HI-R-0-F-0-0-E提供10至1000毫秒的时间延迟，步骤为10，启动时定时精度为+/-100毫秒。该装置具有降低电压的开始，在1步的过渡电平为25至300% FLA，在1步的过渡时间为1至250秒。转换控制可以是当前的、定时器的，或者两者都有。

369-HI-R-0-F-0-0-E设计用于在-40摄氏度至+60摄氏度的温度范围内工作，当湿度保持在95%以下而不凝结时。该装置在此范围内不需要任何特殊的通风要求，但重要的是要注意，增加了Profibus, Modbus/TCP或DeviceNet选项，将工作范围限制在+5至+60摄氏度。更多信息请参考GE Multilin手册或用户指南。

369-HI-R-0-F-0-0-E 继电器

369-HI-R-0-F-0-0-E Technical specification

Fuse 3.15AH 250v (5 × 20mm)

Grounding current input frequency 20 to 100hz

Operating range -40°F to +140°F

Phase current secondary input 1a and 5a

Pollution Level ii

RTD Input 3 wires, 100 Ω platinum, 100 Ω nickel, 120 Ω nickel, and 10 Ω copper

Storage range -40°F to +176°F

Product description

The GE Multilin 369-HI-R-0-F-0-0-E relay is designed to provide protection for three-phase motors and associated systems, while also providing monitoring options. The unit has several built-in features, including customer overload curves, built-in RTD inputs, fiber optic ports and enhanced diagnostics.

The display on the 369-HI-R-0-F-0-0-E allows the user to access alarms and trips for the unit location and allows for field programming of set points. The display includes four leds to indicate when the output is started and the corresponding status indicator led. The 12-key keyboard includes a help key to access the pre-programmed help screen. The unit is protected by a flame-retardant housing.

The back of the 369-HI-R-0-F-0-0-E includes 12 built-in RTD inputs. These fields are optional. The unit has four output relays, a customer-accessible fuse, digital inputs, RS485 ports and analog outputs, as well as fiber optic data links for use in harsh environments.

The 369-HI-R-0-F-0-0-E offers a time delay of 10 to 1000 ms with a step of 10 and a timing accuracy of +/-100 ms at startup. The device has a reduced voltage beginning with a transition level of 25 to 300% FLA at step 1 and a transition time of 1 to 250 seconds at step 1. The conversion control can be current, timer, or both.

The 369-HI-R-0-F-0-0-E is designed to operate in a temperature range from -40 degrees Celsius to +60 degrees Celsius when humidity is kept below 95% without condensation. The unit does not require any special ventilation requirements in this range, but it is important to note that the addition of Profibus, Modbus/TCP or DeviceNet options limits the operating range to +5 to +60 degrees Celsius. Refer to the GE Multilin manual or user Guide for more information.