369-HI-0-M-0-0-0 电机保护继电器

通讯无隔离RS232口，RS485口

控制电源输入范围110至250 VDC, 100至240 VAC在50/60 Hz

差动开关延时< 200ms

尺寸约:29.6厘米高× 10.7厘米宽× 20.5厘米长

事件记录触发电源故障，报警，自检，抑制，跳闸，波形捕获

工作范围-40°C(-40°F)至+60°C(140°F)

存储范围-40°C(-40°F)至+80°C(176°F)

联系电话：18059884797

立即咨询在线留言

产品详情

369-HI-0-M-0-0-0 电机保护继电器

【功能描述】

369-HI-0-M-0-0技术规范

通讯无隔离RS232口，RS485口

控制电源输入范围110至250 VDC, 100至240 VAC在50/60 Hz

差动开关延时< 200ms

尺寸约:29.6厘米高× 10.7厘米宽× 20.5厘米长

事件记录触发电源故障，报警，自检，抑制，跳闸，波形捕获

工作范围-40°C(-40°F)至+60°C(140°F)

存储范围-40°C(-40°F)至+80°C(176°F)

产品描述

369- hi -0- m -0-0是通用电气的369电机保护继电器。它是该公司Multilin 369产品线的一部分。该机组额定50-300 VDC或60-265 VAC控制电源。

369继电器具有许多基本功能。这包括电流不平衡和单相检测，接地故障，双速电机保护和相位过载曲线。它可以显示千瓦、千瓦时、频率、相电压、功率因数和MWhr等功能。该装置通过其前部LCD提供本地检索功能，但也可与SCADA或工作站一起工作。

369-HI-0-M-0-0包括一个可选的计量包。可选的计量包允许启用位于单元上的相位电压(VT/PT)输入。最大VT比为240:1。369单元将接受开放式三角或眼形连接的vt。

三个额外的模拟输出包括这个计量选项。每个模拟输出都是现场可编程的。所有输出(包括基本单元的标准模拟电流输出)共享一个共同的回报。

继电器有许多不同的选择。请检查我们的在线库存，如果你需要一个单位与不同的选项。

GE手册将指导您逐步完成安装过程。这些文档还将帮助您进行维护、故障排除和正确的处理。

369-HI-0-M-0-0-0 电机保护继电器

369-HI-0-M-0-0 Technical specification

Communication No isolated RS232 port, RS485 port

Control power input range 110 to 250 VDC, 100 to 240 VAC at 50/60 Hz

Differential switch delay < 200ms

Dimensions :29.6 cm high x 10.7 cm wide x 20.5 cm long

Event logging triggers power failure, alarm, self-check, suppression, trip, waveform capture

Operating range -40°C(-40°F) to +60°C(140°F)

Storage range -40°C(-40°F) to +80°C(176°F)

Product description

The 369-HI-0-M-0-0 is a General Electric 369 motor protection relay. It is part of the company's Multilin 369 product line. The units are rated for 50-300 VDC or 60-265 VAC control power.

369 relays have many basic functions. This includes current unbalance and single-phase detection, ground faults, two-speed motor protection and phase overload curves. It can display functions such as kW, KWH, frequency, phase voltage, power factor and MWhr. The unit provides local retrieval through its front LCD, but can also work with SCADA or a workstation.

The 369-HI-0-M-0-0 includes an optional metering package. An optional metering package allows the phase voltage (VT/PT) input located on the unit to be enabled. The maximum VT ratio is 240:1. Unit 369 will accept vt with open triangle or eye connections.

Three additional analog outputs include this metering option. Each analog output is field programmable. All outputs (including the standard analog current output of the base unit) share a common return.

There are many different options for relays. Please check our online inventory if you need a unit with different options.

The GE manual guides you through the installation process step by step. These documents will also help you with maintenance, troubleshooting, and proper handling.