DS200SDCCG2A SDCC驱动控制卡 具有接口电路

DS200SDCCG2A  SDCC驱动控制卡  具有接口电路

DS200SDCCG2A 技术指标

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SDCCG2A

产品类型 SDCC驱动控制卡

产品描述

GE驱动器控制板DS200SDCCG2A是驱动器的主控制器。GE驱动控制板DS200SDCCG2A装有3个微处理器和RAM，可由多个微处理器同时访问。GE驱动控制板DS200SDCCG2A配有5个连接器，用于可擦除可编程只读存储器（EPROM）。连接器出厂时未安装 EPROM。其中四个 EPROM 用于存储出厂的配置数据，一个 EPROM 用于包含用户配置数据。

在更换过程中，您必须佩戴腕带以保护EPROM免受静电的影响。从有缺陷的电路板上取下所有五个EPROM，并将它们存放在安全的地方。然后，将 EPROM 安装在更换板上的相同连接器中。这样，电路板将具有与原始电路板相同的配置值。

同时，当您卸下DS200SDCCG2A EPROM芯片时，还要卸下安装在原始板上的任何辅助卡。辅助卡安装在板上，它们还具有从可选卡连接的电缆。然后，将它们与 EPROM 一起安装在替换板上。确保连接可选卡所需的任何电缆。此外，组件可能位于不同的位置，在某些情况下，更换板中可能缺少组件。

The GE drive control board DS200SDCCG2A is the main controller of the drive. The GE drive control board DS200SDCCG2A is equipped with three microprocessors and RAM, which can be accessed by multiple microprocessors simultaneously. The GE drive control board DS200SDCCG2A is equipped with 5 connectors for erasable programmable read-only memory (EPROM). The connector was not installed with EPROM at the factory. Four EPROMs are used to store factory configuration data, and one EPROM is used to contain user configuration data.

During the replacement process, you must wear a wrist strap to protect the EPROM from static electricity. Remove all five EPROMs from the defective circuit board and store them in a safe place. Then, install the EPROM in the same connector on the replacement board. In this way, the circuit board will have the same configuration values as the original circuit board.

At the same time, when you remove the DS200SDCCG2A EPROM chip, you also need to remove any auxiliary cards installed on the original board. Auxiliary cards are installed on the board and they also have cables connected from optional cards. Then, install them together with the EPROM on the replacement board. Make sure to connect any cables required for the optional card. In addition, components may be located in different locations, and in some cases, components may be missing from the replacement board.

关于DS200SDCCG2A的常见问题

DS200SDCCG2A 有多少个微处理器？

DS200SDCCG2A 具有三个 16 位微处理器和相关电路，通过双端口 RAM 耦合。DS200SDCCG2A 具有驱动控制处理器，DS200SDCCG2A 具有电机控制处理器，DS200SDCCG2A 具有协电机处理器。

DS200SDCCG2A具有什么类型的接口电路？

DS200SDCCG2A具有接口电路，可与其他电路板连接，形成各种类型的交流和直流电机驱动器。DS200SDCCG2A上的接口电路控制和处理驱动和电机信号以及客户I/O。