DS200SDCCG1AGD GE控制板 装有3个微处理器和RAM

DS200SDCCG1AGD  GE控制板  装有3个微处理器和RAM

DS200SDCCG1AGD 技术指标

制造者 通用电气通用电气

系列 马克五世

部件号 DS200SDCCG1AGD

产品类型 驱动控制卡

产品描述

GE驱动器控制板DS200SDCCG1AGD是驱动器的主控制器。GE驱动控制板DS200SDCCG1AGD装有3个微处理器和RAM，可由多个微处理器同时访问。GE驱动控制板DS200SDCCG1AGD上的<>个LED用于在发生触发故障的错误时显示故障代码。十个 LED 排列成一排，它们一起显示错误代码。如果未遇到错误并且电路板运行正常，则 LED 从左到右按两个 LED 的顺序点亮。

要查看 LED，您可以打开板柜门，找到DS200SDCCG1AGD电路板，目视检查 LED 并了解电路板的状况。但是，当您打开板柜门时必须小心，因为电路板和所有组件中都存在高压。将电源连接到驱动器时，请勿触摸机柜中的任何东西。另外，不要在门打开时让任何东西掉在柜子里，并在检查完成后关闭门。

首次启动DS200SDCCG1AGD时，必须设置配置参数，以定义开发板如何处理信息和控制驱动器。有一些软件工具可用于编辑参数。这些工具可在笔记本电脑上使用。如果要配置多个驱动器，则可以创建一个配置并将相同的配置下载到多个主板。

The GE driver control board DS200SDCCG1AGD is the main controller of the driver. The GE drive control board DS200SDCCG1AGD is equipped with three microprocessors and RAM, which can be accessed by multiple microprocessors simultaneously. The<>LEDs on the GE drive control board DS200SDCCG1AGD are used to display fault codes in the event of an error triggering a fault. Ten LEDs are arranged in a row and display error codes together. If no error is encountered and the circuit board operates normally, the LEDs are lit from left to right in the order of two LEDs.

To check the LED, you can open the cabinet door, locate the DS200SDCCG1AGD circuit board, visually inspect the LED and understand the condition of the circuit board. However, you must be careful when opening the cabinet door, as high voltage is present in the circuit board and all components. Do not touch anything in the cabinet when connecting the power supply to the drive. Also, do not let anything fall into the cabinet when the door is open, and close the door after the inspection is completed.

When starting DS200SDCCG1AGD for the first time, configuration parameters must be set to define how the development board processes information and controls the driver. There are some software tools available for editing parameters. These tools can be used on laptops. If you want to configure multiple drives, you can create a configuration and download the same configuration to multiple motherboards.

DS200SDCCG1AGD 常见问题

DS200SDCCG1AGD的三个主要微处理器是什么？

DS200SDCCG1AGD有三个主要的微处理器。DS200SDCCG1AGD的微处理器包括：驱动控制处理器、电机控制处理器和协电机处理器。

DS3SDCCG200AGD 上的 1PL 卡连接是什么？

DS3SDCCG200AGD 上的 1PL 卡连接用于将 DS200SDCCG1AGD 输出到 LAN 通信卡。

DS200SDCCG1AGD上的故障是否有模式？

是的。DS200SDCCG1AGD上的故障以二进制编码十进制或二进制形式显示在DS200SDCCG1AGD上。DS1SDCCG399AGD上的故障200-1具有BCD模式，而DS400SDCCG1023AGD上的故障200-1以二进制形式显示。