IS200STCIH2A 导轨接触端子PCB

联系电话：18059884797

产品详情

IS200STCIH2A 导轨接触端子PCB

【功能描述】

IS200STCIH2A是DIN导轨接触端子PCB。它最初是由GE为Mark VI系列涡轮机控制系统创建的。

IS200STCIH2A由许多不同类型的组件组成。在电路板的右下角和左下角，有两个工厂钻孔的端子孔，并已加固。还有两个大的钻孔在左边和右边，是略高于中心的板边缘。单板底部有两个绿色的端子带，并有数字标识。底部条形标签为2-52，均匀编号。顶部端子带的奇怪编号为1-51。在板的顶部边缘，有一个37针RS-232母端口。电路板的零件号在卡片的右下方。该板也有一个3针插孔连接，是白色的，位于顶部端子带上方一点。这张卡还有91个电阻、24个电容、27个二极管、2个晶体管和23个集成电路。

由于IS200STCIH2A是PCB，因此应始终小心处理。为了防止静电的积聚和释放造成任何类型的损坏，在准备安装之前，必须将单板放在防静电包装中。一旦可以安装，一定要戴上防静电腕带。此外，为了帮助安装过程，最好记录下新板正在更换的原板上的电线和电缆的位置。

IS200STCIH2A is a DIN rail contact terminal PCB. It was originally created by GE for the Mark VI series turbine control system.

The IS200STCIH2A is composed of many different types of components. In the lower right and left corners of the board, there are two factory drilled terminal holes and have been reinforced. There are also two large drill holes on the left and right that are slightly above the center of the board edge. At the bottom of the board, there are two green terminal belts with digital identifiers. The bar labels at the bottom are numbered 2-52. The strange number of the top terminal band is 1-51. On the top edge of the board, there is a 37-pin RS-232 female port. The part number of the board is at the bottom right of the card. The board also has a 3-pin jack connection, which is white and located a little above the top terminal band. The card also has 91 resistors, 24 capacitors, 27 diodes, 2 transistors, and 23 integrated circuits.

Since IS200STCIH2A is a PCB, it should always be handled with care. To prevent any type of damage caused by the buildup and release of static electricity, you must place boards in anti-static packaging before installation. Once installed, be sure to wear an ESD wrist strap. In addition, to help with the installation process, it is best to record the location of the wires and cables on the original board where the new board is being replaced.