DS200RTBAG3AHC 继电器端子板 具有两个刺入连接器
DS200RTBAG3AHC 技术规格
制造者通用电气通用电气
系列马克五世
部件号DS200RTBAG3AHC
产品类型继电器端子板
产品描述
GE功率励磁板DS200RTBAG3AHC是安装在驱动柜中的可选板,它具有十个继电器,可以直接由先导继电器驱动,也可以由用户远程驱动。 DS200RTBAG3AHC板有52个接线点。端点用于 I/O 目的。例如,一个系列的接线点用于继电器 K20 形式的 C 触点。一个端点用于常开位置,一个接线点用于公共,一个接线点用于常闭位置。
DS200RTBAG3AHC还具有两个刺入连接器。连接器为 CPH 和 CPN,它们提供可插拔的电路控制电源。CPH 是正电源连接器,CPN 是负电源连接器。提供电源的可插拔电路是 C1PL 到 C5PL 和 Y9PL 到 Y37PL 可插拔电路。例如,一个连接器提供正极可插拔电路控制电源。另一种是用于负极可插拔电路控制电源。
DS200RTBAG3AHC板能量高,如果在电源连接到板上时被触摸,则存在安全风险。触摸驱动器中的任何其他组件也存在风险。您必须按照步骤断开驱动器和主板的所有电源。首先,使用控制面板停止电机,并使用标准程序有序关闭驱动器。要断开驱动器的所有电源,请找到提供三相电流的电源并拔出保险丝。
The GE power excitation board DS200RTBAG3AHC is an optional board installed in the drive cabinet, which has ten relays that can be directly driven by the pilot relay or remotely driven by the user. The DS200RTBAG3AHC board has 52 wiring points. The endpoint is used for I/O purposes. For example, a series of wiring points are used for relay K20 form C contacts. One endpoint is used for the normally open position, one wiring point is used for common, and one wiring point is used for the normally closed position.
The DS200RTBAG3AHC also has two plug-in connectors. The connectors are CPH and CPN, which provide pluggable circuit control power supply. CPH is a positive power connector, while CPN is a negative power connector. The pluggable circuits that provide power are C1PL to C5PL and Y9PL to Y37PL pluggable circuits. For example, a connector provides positive pole pluggable circuit control power supply. Another type is used for negative pole pluggable circuit control power supply.
The DS200RTBAG3AHC board has high energy, which poses a safety risk if touched while the power is connected to the board. Touching any other components in the drive also poses a risk. You must follow the steps to disconnect all power from the drive and motherboard. Firstly, use the control panel to stop the motor and orderly shut down the drive using standard procedures. To disconnect all power to the drive, locate the power supply that provides three-phase current and unplug the fuse.
DS200RTBAG3AHC 常见问题
DS200RTBAG3AHC 的首字母缩略词是什么?
DS200RTBAG3AHC 由首字母缩略词 RTBA 标识。RTBA位于DS200RTBAG3AHC型号的中间,DS200RTBAG3AHC是继电器端子板。
DS200RTBAG3AHC 有多少个继电器?
DS200RTBAG3AHC 有 10 个继电器 K20-K29,可直接从 LAN I/O 终端板上的先导继电器驱动,也可由用户远程驱动。
DS200RTBAG3AHC 是什么板组?
DS200RTBAG3AHC 是 G3 板组,在 DS3RTBAG200AHC 的型号中与 G3 标识。G3 RTBA的线圈电压为115 VAC。对于DS20RTBAG26AHC上的继电器K200-K3,DS200RTBAG3AHC具有115个VAC线圈和10 A DPDT触点。对于DS27RTBAG29AHC上的继电器K200-K3,DS200RTBAG3AHC具有115个VAC线圈和1个A 4PDT触点。
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33