DS200RTBAG2AHC 继电器端子板 用于通用电气的许多励磁器或驱动器

GE Mark V DS200RTBAG2AHC用作GE Mark V Speedtronic系列中的继电器卡模块

产品描述

DS200RTBAG2AHC是继电器端子板，是Mark V板组件。该装置可用于通用电气的许多励磁器或驱动器，并在安装后在其主机的机柜内提供十个额外的继电器点。DS200RTBAG2AHC可用于局域网和远程I/O终端控制。

DS200RTBAG2AHC提供 24 VDC 线圈电压。如果您需要不同的电压等级，请查看 RTBAG1 板用于 110 VDC 或 RTBAG3 板用于 115 VAC 线圈电压。DS200RTBAG2AHC表面有4个继电器。其中包括七个 DPDT 继电器，每个继电器有两个 Form-C 触点和三个 130PDT 继电器。每个继电器都由其自身的 <> V 交流金属氧化物压敏电阻 （MOV） 保护。如果需要，可以拆卸和更换这些组件。

DS200RTBAG2AHC具有多个伯格式跳线引脚，允许用户根据需要配置电路板。该板还包括两个 stab 连接器、一个 <> 针连接器和一个允许连接到其他板的两针连接器。重要的是要注意，在开始任何类型的安装或维护之前，应断开DS200RTBAG2AHC板上的电源。在仍然通电时触摸电路板可能会导致电击或其他伤害。电路板应始终被视为静电敏感。我们运送由静电敏感包装保护的 Mark V 板。

DS200RTBAG2AHC is a relay terminal board and a Mark V board component. This device can be used for many exciters or drivers of General Electric, and provides ten additional relay points in its host's cabinet after installation. DS200RTBAG2AHC can be used for local area network and remote I/O terminal control.

DS200RTBAG2AHC provides 24 VDC coil voltage. If you need different voltage levels, please check whether the RTBAG1 board is used for 110 VDC or the RTBAG3 board is used for 115 VAC coil voltage. There are 4 relays on the surface of DS200RTBAG2AHC. This includes seven DPDT relays, each with two Form-C contacts and three 130PDT relays. Each relay is protected by its own<>V AC metal oxide varistor (MOV). If necessary, these components can be disassembled and replaced.

DS200RTBAG2AHC has multiple Burr format jumper pins, allowing users to configure the circuit board as needed. The board also includes two stab connectors, a<>pin connector, and a two pin connector that allows connection to other boards. It is important to note that before starting any type of installation or maintenance, the power supply on the DS200RTBAG2AHC board should be disconnected. Touching the circuit board while still powered on may cause electric shock or other injuries. Circuit boards should always be considered static sensitive. We ship Mark V boards protected by static sensitive packaging.