DS200RTBAG2AGC 通用电气继电器端子卡 用于Mark V涡轮机控制系统

DS200RTBAG2AGC 通用电气继电器端子卡 用于Mark V涡轮机控制系统

DS200RTBAG2AGC 技术指标

制造者通用电气通用电气

系列马克五世

部件号DS200RTBAG2AGC

产品类型继电器端子板

产品描述

DS200RTBAG2AGC是一款24 VDC继电器端子板。 它设计用于通用电气的Mark V涡轮机控制系统。Mark V是通用电气的Speedtronic系统之一，从Mark I系统开始，一直延续到Mark VI。Speedtronic系统旨在为工业涡轮机系统提供控制，保护和管理。DS200RTBAG2AGC 是 24 VDC 继电器板。

DS200RTBAG2AGC是可选电路板。虽然它通常位于驱动器或励磁器柜内，但该板可以由用户或 LAN I/O 终端板上的先导继电器 （531X307LTB） 远程驱动。十个继电器中的两个有两个 C 型触点。三个继电器有四个 C 型触点。电路板的每个继电器都包含一个 LED，该 LED 将通电并让用户知道组件何时在使用中。

DS200RTBAG2AGC具有多个伯格型硬件跳线。这些将在默认设置中发送给您。但是，您应该根据当前的电路板组件检查跳线设置（如果要更换电路板），并确保所有跳线都设置在相同的位置。

DS200RTBAG2AGC is a 24 VDC relay terminal board. It is designed for General Electric's Mark V turbine control system. Mark V is one of General Electric's Speedtronic systems, starting from the Mark I system and continuing to the Mark VI. The Speedtronic system aims to provide control, protection, and management for industrial turbine systems. DS200RTBAG2AGC is a 24 VDC relay board.

DS200RTBAG2AGC is an optional circuit board. Although it is typically located inside the driver or exciter cabinet, the board can be remotely driven by a pilot relay (531X307LTB) on the user or LAN I/O terminal board. Two out of ten relays have two C-type contacts. Three relays have four C-type contacts. Each relay on the circuit board contains an LED that will energize and let the user know when the component is in use.

DS200RTBAG2AGC has multiple Burger type hardware jumpers. These will be sent to you in the default settings. However, you should check the jumper settings based on the current circuit board components (if replacing the circuit board) and ensure that all jumpers are set in the same position.