DS200RTBAG2AFB 继电器端子板 以为用户提供额外的十个继电器

DS200RTBAG2AFB  继电器端子板  以为用户提供额外的十个继电器

产品描述

DS200RTBAG2AFB是专为通用电气的Mark V板系列设计的继电器端子板（RTBA）。该板可用于许多GE品牌驱动器和励磁器的应用。通过将此板安装到驱动柜中，可以为用户提供额外的十个继电器。LAN I/O 终端和远程用户都可以驱动该板上的继电器。

位置 K20 到 K29 是所有板载继电器的板位置。 DS200RTBAG2AFB 包括两种类型的继电器：双掷和双掷和 4PDT。DPDT 类型包括卡上的七个继电器，包括 K20 到 K26。这些类型具有两个 C 型触点，每个触点额定值为 10A。K27 到 K29 是第二种继电器类型 4PDT。4PDT 继电器包括四个 C 型触点，每个触点的电流为 1A，而不是两个。所有这十个点都由 130 VAC 金属氧化物压敏电阻 （MOV） 保护。每个继电器包含一个内部 110 VDC 线圈，以确保它们正常运行。如果任何继电器停止工作或损坏，用户可以轻松移除并更换所有十个点。

应遵循有关DS200RTBAG2AFB安装和存储指南的参数。这将确保电路板和整个驱动系统的完整性。该器件的手册和数据表都提供了该板的详细安装和接线指南。Mark V板系列的成员由制造商通用电气提供技术支持。

DS200RTBAG2AFB is a relay terminal board (RTBA) designed specifically for General Electric's Mark V board series. This board can be used for many applications of GE branded drives and exciters. By installing this board into the drive cabinet, an additional ten relays can be provided to the user. Both LAN I/O terminals and remote users can drive the relays on this board.

Positions K20 to K29 are the board positions for all onboard relays. DS200RTBAG2AFB includes two types of relays: double throw and double throw, and 4PDT. The DPDT type includes seven relays on the card, including K20 to K26. These types have two C-type contacts, each rated at 10A. K27 to K29 are the second relay type 4PDT. The 4PDT relay consists of four C-type contacts, each with a current of 1A instead of two. All ten points are protected by 130 VAC metal oxide varistor (MOVs). Each relay contains an internal 110 VDC coil to ensure their normal operation. If any relay stops working or is damaged, users can easily remove and replace all ten points.

The parameters related to DS200RTBAG2AFB installation and storage guidelines should be followed. This will ensure the integrity of the circuit board and the entire drive system. The manual and data sheet of the device provide detailed installation and wiring guidelines for the board. The members of the Mark V board series are supported by the manufacturer General Electric.