IS220PPROS1B GE 主网关模块

【功能描述】

型号IS220PPROS1B是通用电气公司生产的Mark VI系列中描述的PROFIBUS主网关模块。虽然该模型设计用于Mark VI系列，但它也可以用于Mark VIe和Mark VIeS系列。PPRF模型被认为是一个模拟输出包，通常与IS200SPIDG1A附件ID板一起使用。I/O包和终端板一起被额定和批准用于危险和非危险场所。

当使用IS220PPROS1B型号时，必须遵循电气规范，以消除潜在的财产损失或某些情况下的人身伤害。有两种规格，分别标有电压和电流。电源电压范围为27.4~28.6 VDC，标称电源电压为28.0 VDC。PPRF包使用的电源电流最大为0.18 ADC。还有一个特定的温度范围，PPRF模型必须在;此温度范围为-4至131°F或-20至55°C。

如上所述，IS220PPROS1B型号被评为在危险和非危险场所使用。对于每个位置，都有一个列表认证。无危险认证为UL E207685，与ii类A、B、C、D组和ii类2区IIC组认证相同。ATEX Zone 2,Group IIC的认证是UL DEMKO 12 ATEX 1114875X。更多认证请参考GEH-6725 Mark VIe和Mark VIe控制设备HazLoc手册。

关于IS220PPROS1B的常见问题

IS220PPROS1B型号是什么类型的I/O包?

IS220PPROS1B包被通用电气标记为模拟I/O包。该型号特别标记为PROFIBUS主网关模块。

IS220PPROS1B型号是否与Mark VI,VIe或VIeS系列的任何终端板接口?

有一个特定的终端板，IS220PPROS1B模型将接口;这个型号被标记为IS200SPIDG1A附件ID板。

描述中只有IS220PPROS1B型号的认证吗?

不，还有更多的位置/认证可以使用IS220PPROS1B模型。IS220PPROS1B型号的另一个标准是ANSI/ISA-12.12.01-2015或CAN/CSA-C.22.2 No.213-15。这些标准被归类为第一类，第二部分，A、B、C和D组。

我在哪里可以找到关于PPRF模型的信息?

关于PPRF模型的信息可以在任何可用的Mark VI、Mark VIe或Mark VIeS文档中找到。信息的主要来源之一是GEH-6725 Mark VIe和Mark VIe控制设备HazLoc指南，该指南仅提供有关标准和认证以及型号的电气额定值的信息。

使用数字化离线操作技术带来的好处济钢焦化厂使用数字化离线控制技术带来的好处可以归纳如下：

在技术层面上，由于在DCS系统中采用现场总线PROFIBUS，PROFIBUS的屏蔽双绞线和光纤大大提高了系统信号的抗干扰能力，提高了系统整体可靠性，同时现场总线的使用，也使得从热工过程到系统的信号转换环节减少，系统整体精度提高；另外现场总线预制电缆的使用，大大减少了传统手工作业的镙钉端子数量，从而提高了系统的整体安全性。在运行层面上，由于采用PROFIBUS现场总线系统，系统的监控范围从传统的系统端子排扩展到全厂，真正实现了全厂监控，同时由于可方便采集设备的管理、诊断及维修信息，使系统具有完善有效的设备诊断功能，真正实现现场设备的远程编程和维护，真正实现了全厂数据的集中管理，使设备的状态检修成为可能，提供更多的设备信息使操作和维护得到优化。

IS220PPROS1B GE 主网关模块

The model IS220PPROS1B is a PROFIBUS main gateway module described in the Mark VI series produced by General Electric. While the model is designed to work with the Mark VI series, it can also work with the Mark VIe and Mark VIeS series. The PPRF model is considered an analog output package and is commonly used with the IS200SPIDG1A Accessory ID board. I/O packets and end boards together are rated and approved for use in hazardous and non-hazardous locations.

When using the IS220PPROS1B model, electrical codes must be followed to eliminate potential property damage or, in some cases, personal injury. There are two sizes, marked with voltage and current respectively. The power supply voltage ranges from 27.4 to 28.6 VDC, and the nominal power supply voltage is 28.0 VDC. PPRF packages use a power supply current of up to 0.18 ADC. There is also a specific temperature range in which the PPRF model must operate; This temperature range is -4 to 131°F or -20 to 55°C.

As mentioned above, the IS220PPROS1B model is rated for use in hazardous and non-hazardous places. For each location, there is a list authentication. The hazard free certification is UL E207685, the same as Class ii Group A, B, C, D and Class ii Area 2 IIC Group certification. The certification of ATEX Zone 2,Group IIC is UL DEMKO 12 ATEX 1114875X. For more certifications, refer to the GEH-6725 Mark VIe and Mark VIe Control Device HazLoc Manual.

Frequently asked Questions about IS220PPROS1B

What type of I/O package is the IS220PPROS1B model?

The IS220PPROS1B package is labeled by General Electric as an analog I/O package. This model is specifically labeled PROFIBUS Main Gateway Module.

Does the IS220PPROS1B model interface with any terminal board of the Mark VI,VIe or VIeS series?

There is a specific terminal board, IS220PPROS1B model will interface; The model number is labeled IS200SPIDG1A Accessory ID board.

Is only IS220PPROS1B model certified in the description?

No, there are many more locations/certifications available using the IS220PPROS1B model. Another standard for IS220PPROS1B models is ANSI/ISA-12.12.01-2015 or CAN/CSA-C.22.2 No.213-15. These criteria are classified as Category I, Part II, Groups A, B, C and D.

Where can I find information about the PPRF model?

Information about the PPRF model can be found in any available Mark VI, Mark VIe, or Mark VIeS documentation. One of the main sources of information is the GEH-6725 Mark VIe and Mark VIe Control Equipment HazLoc Guide, which only provides information on standards and certifications and the electrical rating of the model.

The benefits of using digital offline operation technology The benefits of using digital offline control technology in Jinan Coking Plant can be summarized as follows:

At the technical level, due to the use of field bus PROFIBUS in DCS system, the shielding of twisted pair and optical fiber of PROFIBUS greatly improves the anti-interference ability of system signal and improves the overall reliability of the system. At the same time, the use of fieldbus also reduces the signal conversion link from thermal process to the system and improves the overall accuracy of the system. In addition, the use of fieldbus prefabricated cables greatly reduces the number of screw terminals for traditional manual work, thus improving the overall safety of the system. At the operational level, due to the use of PROFIBUS field bus system, the monitoring range of the system extends from the traditional system terminal block to the whole plant, which truly realizes the whole plant monitoring. At the same time, because it can easily collect the management, diagnosis and maintenance information of the equipment, the system has perfect and effective equipment diagnosis function, and truly realizes the remote programming and maintenance of on-site equipment. Truly realize the centralized management of the whole plant data, make it possible to repair the condition of the equipment, provide more equipment information to optimize the operation and maintenance.

IS220PPROS1B GE 主网关模块

【联系我们】

厦门雄霸电子商务有限公司

厦门市思明区吕岭路1733号创想中心2009-2010单元

联系人：珊妮

电话：18059884797

电子邮件：2082431634 @qq.com

QQ：2082431634

【常问问题】

1.保修怎么样？

所有产品均享有1年保修。

2.什么是交货时间？

通常1-3个工作日

3.其他供应商的价格比您好吗？

“为客户创造利益是我们的信念。如果您有更好的价格，请告诉我们。我们会尽力满足您的价格并支持您

4.发货怎么样？

我们可以安排发货以具有竞争力的价格，例如顺丰，德邦等