IS215UCVEH2AB GE UCVE控制器

IS215UCVEH2AB GE  UCVE控制器

IS215UCVEH2AB模型被标记为标准标志VI控制器，设计为6U高，单/双槽，单板计算机，通常用于操作涡轮机应用程序代码。该型号的位置在VME机架上，有21个或13个插槽。当位于控制模块时，它将通过VME总线与其他涡轮I/O板通信。该板使用的典型操作系统是QNX。QNX系统是一个多任务、实时操作系统，专为高可靠性和高速工业应用而设计。

关于型号IS215UCVEH2AB的一个重要注意事项是，它只是Mark VI系统中使用的三个控制器之一，该型号可以替换其他控制器，但通常需要升级背板。该型号可以取代ICVB型号，但这样做时必须升级以太网电缆。

当控制器与此类产品一起使用时，它有一个特定的执行时间，最高可达每秒十万黑或梯级。当使用特定类型的应用软件时，软件可以在线修改而不需要重新启动。

IS215UCVEH2AB型号只是UCVE控制器的一种变体。UCVEH2控制器有两种不同的内存类型，分别是32兆的DRAM和16兆的闪存。有关此控制器的更多信息，请参阅GEH-6421C卷二马克六涡轮控制手册。

IS215UCVEH2AB GE  UCVE控制器

The IS215UCVEH2AB model is labeled as a standard Mark VI controller and is designed as a 6U tall, single/double slot, single-board computer, typically used to operate turbine application code. This model is located in a VME rack with either 21 or 13 slots. When located in the control module, it will communicate with other turbine I/O boards via the VME bus. The typical operating system used for this board is QNX. The QNX system is a multi-tasking, real-time operating system designed for high reliability and high-speed industrial applications.

An important note about the model IS215UCVEH2AB is that it is only one of three controllers used in Mark VI systems, and this model can replace the others, but usually requires an upgrade to the backplane. This model can replace the ICVB model, but the Ethernet cable must be upgraded to do so.

When the controller is used with such products, it has a specific execution time of up to 100,000 black per second or steps. When using specific types of application software, the software can be modified online without the need to restart.

The IS215UCVEH2AB model is only a variant of the UCVE controller. The UCVEH2 controller comes in two different memory types, 32 megabytes of DRAM and 16 megabytes of flash. For more information on this controller, please refer to the GEH-6421C Volume II Mark VI Turbine Control Manual.

IS215UCVEH2AB GE  UCVE控制器