DS200QTBAG1B GE通用电气RST 端子板 具有伺服阀输出

DS200QTBAG1B  GE通用电气RST 端子板  具有伺服阀输出

DS200QTBAG1B 技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200QTBAG1B

产品类型 RST 端子板

产品描述

GE RST 终端板 DS200QTBAG1B 具有 2 个接线端子，每个接线端子用于 72 根信号线。它还包含 1 个 40 针连接器。40 针连接器的 ID 是 JFF。它还装有 1 个串行连接器。GE RST 终端板 DS200QTBAG1B 还配有 1 个 3 针跳线。跳线覆盖电路板上 2 个引脚中的 3 个，以启用配置选项。当出厂的原始电路板安装在驱动器中时，安装程序会参考纸箱中随附的文档以获取有关跳线的信息。如果引脚 1 和 2 被跳线覆盖，则电路板配置为处理该跳线配置定义的信息。如果引脚 2 和 3 被跳线覆盖，则电路板将按照该配置的定义处理信息。某些跳线无法移动以更改配置，因为仅支持一种配置。另一种配置仅供工厂使用，或用于未来主板版本支持的配置。例如，在制造过程中，工厂可能会使用不受支持的配置进行产品测试。或者，DS200QTBAG1B电路板上装有仅具有 1 个支持功能的跳线。另一个功能将在开发板的未来版本中实现。

要更改跳线的位置，请用拇指和食指抬起跳线。然后，将跳线与要覆盖的引脚对齐，并将跳线按在引脚上。

The GE RST terminal board DS200QTBAG1B has 2 wiring terminals, each for 72 signal wires. It also includes a 40 pin connector. The ID of the 40 pin connector is JFF. It is also equipped with a serial connector. The GE RST terminal board DS200QTBAG1B is also equipped with a 3-pin jumper. Jumpers cover 3 out of 2 pins on the circuit board to enable configuration options. When the original circuit board from the factory is installed in the driver, the installation program will refer to the documentation provided in the cardboard box for information on jumpers. If pins 1 and 2 are covered by jumpers, the circuit board is configured to handle the information defined by the jumper configuration. If pins 2 and 3 are covered by jumpers, the circuit board will process information according to the definition of that configuration. Some jumpers cannot be moved to change configuration because only one configuration is supported. Another configuration is only for factory use or for future motherboard versions to support. For example, during the manufacturing process, factories may use unsupported configurations for product testing. Alternatively, the DS200QTBAG1B circuit board is equipped with only one supported jumper. Another feature will be implemented in a future version of the development board.

To change the position of the jumper, lift the jumper with your thumb and index finger. Then, align the jumper with the pin to be covered and press the jumper onto the pin.

关于 DS200QTBAG1B 的常见问题

DS200QTBAG1B 安装在哪里？

DS200QTBAG1B 安装在 TBQA 板上，TBQA 板是用于 TIMN 诊断的 9 针 RS-232 连接器。

DS200QTBAG1B 有哪些类型的磁性拾音器？

DS200QTBAG1B 具有 HP 和 LP 磁性拾音器，可实现速度。DS200QTBAG1B 还具有分流器磁性拾音器。

DS200QTBAG1B 具有什么样的输出？

DS200QTBAG1B 具有伺服阀输出。