DS200RTBAG4RHC GE继电器端子板 具有十个继电器

DS200RTBAG4RHC  GE继电器端子板 具有十个继电器

DS200RTBAG4RHC技术规格

制造者 通用电气通用电气

系列 马克五世

部件号 DS200RTBAG4RHC

产品类型 继电器端子板

产品描述

GE功率励磁板DS200RTBAG4RHC是安装在驱动柜中的可选板，具有十个继电器，可以直接由先导继电器驱动，也可以由用户远程驱动。DS200RTBAG4RHC板具有多个跳线，可用于控制电路板的行为、用于可插拔电路的电线连接器、电缆连接器、带状电缆和用于可插拔电路电源的插刺连接器。

在断开任何电缆或电线之前，请务必注意所有电线和电缆在有缺陷的电路板上的连接位置。在断开电缆或电线的连接之前，制作标签以指示其连接位置。连接器在电路板上都有标识符，它们提供了一种精确而简单的识别方法。带状电缆特别脆弱，需要您了解连接和断开它们的正确程序。构成带状电缆上每个信号的细线很容易损坏，并且可以与连接器断开连接。仅用一只手握住连接器上的带状电缆，另一只手握住电路板上的连接器。将它们拉开以断开连接。

DS200RTBAG4RHC板上的 RTB 端子用小螺钉固定到位，可牢固地固定端子。要解开它们，请使用螺丝刀松开螺钉并拉出电线。不要将螺钉完全从端子上卸下，而是将其留在端子中。如果它确实掉出来，请检索它，以免它在驱动器中丢失。

The GE power excitation board DS200RTBAG4RHC is an optional board installed in the drive cabinet, with ten relays that can be directly driven by the pilot relay or remotely driven by the user. The DS200RTBAG4RHC board has multiple jumpers that can be used to control the behavior of the circuit board, wire connectors for pluggable circuits, cable connectors, ribbon cables, and pin connectors for pluggable circuit power supplies.

Before disconnecting any cables or wires, be sure to pay attention to the connection positions of all wires and cables on the defective circuit board. Before disconnecting a cable or wire, make a label to indicate its connection position. Connectors have identifiers on the circuit board, providing an accurate and simple identification method. Ribbon cables are particularly fragile and require you to understand the correct procedures for connecting and disconnecting them. The thin wires that make up each signal on the ribbon cable are easily damaged and can be disconnected from the connector. Hold the ribbon cable on the connector with only one hand and the connector on the circuit board with the other hand. Pull them apart to disconnect.

The RTB terminals on the DS200RTBAG4RHC board are fixed in place with small screws, which can securely secure the terminals. To undo them, use a screwdriver to loosen the screws and pull out the wires. Do not completely remove the screw from the terminal, but leave it in the terminal. If it does fall out, please retrieve it to avoid losing it in the drive.