IC670MDL740J|  IC670MDL740 | 分立式输出模块

产品型号： IC670MDL740J

产品类型：分立式输出模块

成色：全新/非全新

质保：一年

可用性：现货

从电源汲取的电流： 111毫安

输出分组：单组

最大负载电流 ：0.5 安培，10-30 伏直流电

输出响应时间： 0.5 A 阻性负载时为 200 ms

输出压降： 最大 0.5 伏

保护 内置保险丝，用于群体保护;

输出压降 ：最大 0.5 伏

输出漏电流： 30 VDC 时为 0.5 mA

该IC670MDL740J是由GE Fanuc制造的正逻辑分立输出模块。该模块是一个通用输出模块，安装在总线接口单元 （BIU） 上，用于实现扩展 I/O 解决方案。它通常用于为指示灯、继电器线圈、电磁阀驱动设备和类似额定电流的输出设备通电，因为IC670MDL740在电压输出范围为 10-30 VDC 和 24 VDC 的标称电压下，每通道提供 0.5 安培的输出电流和每个模块总共 4 安培的输出电流。

该IC670MDL740J设计有单独的状态 LED 指示灯，指示模块每个输出通道的开/关状态。整个 I/O 组都安装了一个公共保险丝，该保险丝还分配了一个 LED 指示灯，用于描述保险丝熔断状态。该模块产生的浪涌电流额定值为 2 安培，最大持续时间为 100 ms。输出通道最小负载电流为每点 1 mA，输出压降为 0.5 V，输出漏电流为 0.5 mA（30 VDC），开和关信号转换的典型响应时间。

IC670MDL740J| IC670MDL740 | Separate output module

Product model: IC670MDL740J

Product type: Separate output module

Finish: New/not new

Warranty: One year

Availability: In stock

Current drawn from the power supply: 111 mA

Output group: single group

Maximum load current: 0.5 amps, 10-30 volts DC

Output response time: 200 ms under 0.5A resistive load

Output voltage drop: 0.5 V Max

Protection built-in fuse for group protection;

Output voltage drop: 0.5 V Max

Output leakage current: 0.5 mA at 30 VDC

The IC670MDL740J is a positive logic discrete output module manufactured by GE Fanuc. This module is a universal output module that is installed on the Bus Interface Unit (BIU) to implement an extended I/O solution. It is commonly used to energize indicator lights, relay coils, solenoid drive devices, and output devices with similar current ratings, because the IC670MDL740 operates at nominal voltages in the voltage output range of 10-30 VDC and 24 VDC. Each channel provides 0.5 amps of output current and a total of 4 amps of output current per module.

The IC670MDL740J is designed with a separate status LED indicator indicating the on/off status of each output channel of the module. A common fuse is installed throughout the I/O group, which is also assigned an LED indicator to describe the blown fuse status. The module generates an inrush current rated at 2 amps with a maximum duration of 100 ms. The minimum load current of the output channel is 1 mA per point, the output voltage drop is 0.5 V, the output leakage current is 0.5 mA (30 VDC), and the typical response time of the on and off signal conversion.