型号:IC660BBA101
类别:RTD输入模块
成色:全新/非全新
货期:现货
质保:一年
快递:顺丰/德邦
付款:电汇, 西联汇款
重量 :4 磅
不。输入数量: 六 (6)
RTD传感器: 铂 (DIN 43760)、镍 (DIN 43760)、铜、线性
电阻输入: 0 至 5000 欧姆
目录号为 IC660BBA101 的 GE Fanuc Genius I/O 模块是一个电阻温度检测器 (RTD) 模块,具有六 (6) 个输入电路,三 (3) 组,每组两 (2) 个电路。作为RTD模块I/O模块,该模块用于温度应用,因为RTD传感器通常用于测量温度。此外,该模块还能够接受 0 至 5000 欧姆范围内的电阻输入。
IC660BBA101 RTD 模块 I/O 支持 RTD 传感器,如铂、铜和镍 RTD,线性化和信号调理嵌入 RTD 模块 I/O,并传输到工程单元中的中央处理器 (CPU)。它以十分之一摄氏度、华氏度、欧姆或计数为单位报告。此外,IC660BBA101 RTD 模块 I/O 能够配置报警阈值、Alpha 类型和输入滤波器时间。此RTD模块I/O在工厂已校准,因此在器件运行过程中无需重新校准。
该IC660BBA101还配备了多种诊断功能,如输入短路检测、内部故障检测、接线错误检测、开路检测、超量程和欠量程输入指示以及高低输入报警。故障发生可以自动报告或禁用每个通道。
该IC660BBA101的分辨率为 0.1 摄氏度,绝对精度为 +/-0.5 °C(典型值),铂或镍的绝对精度为 +/-1.0°C,10W 铜的绝对精度为 +/-5°C(典型值),+/-10°C 最大值。它具有软件可配置的更新频率,为每 400 毫秒、800 毫秒或 1600 毫秒一次,每个块的输入滤波器范围为 400 毫秒、800 毫秒、1600 毫秒。
Model: IC660BBA101
Category: RTD Input module
Finish: New/not new
Delivery time: from stock
Warranty: One year
Express: SF Express/Debon
Payment: Wire transfer, Western Union
Weight: 4 pounds
Nooooo. Number of inputs: 6 (6)
RTD sensors: Platinum (DIN 43760), nickel (DIN 43760), copper, linear
Resistance input: 0 to 5000 ohms
The GE Fanuc Genius I/O module, catalog number IC660BBA101, is a resistance temperature detector (RTD) module with six (6) input circuits, three (3) groups of two (2) circuits each. As an RTD module I/O module, this module is used for temperature applications as RTD sensors are commonly used to measure temperature. In addition, the module is capable of accepting resistance inputs in the range of 0 to 5000 ohms.
The IC660BBA101 RTD Module I/O supports RTD sensors, such as platinum, copper and nickel RTDS, linearization and signal conditioning embedded in the RTD module I/O and transmitted to the central processing unit (CPU) in the engineering unit. It is reported in tenths of a degree Celsius, degrees Fahrenheit, ohms, or counts. In addition, the IC660BBA101 RTD module I/O can be configured with alarm thresholds, Alpha types, and input filter times. This RTD module I/O is factory calibrated, so no recalibration is required during device operation.
The IC660BBA101 is also equipped with a variety of diagnostic functions such as input short circuit detection, internal fault detection, wiring error detection, open circuit detection, over - and under-range input indication, and high - and low-input alarm. Fault occurrence can be reported automatically or each channel can be disabled.
The IC660BBA101 has a resolution of 0.1 degrees Celsius with an absolute accuracy of +/-0.5 °C (typical value), an absolute accuracy of +/-1.0°C for platinum or nickel, and an absolute accuracy of +/-5°C (typical value) for 10W copper with a maximum of +/-10°C. It has a software-configurable update frequency of every 400 ms, 800 ms, or 1600 ms, and the input filter range for each block is 400 ms, 800 ms, 1600 ms.
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33