RS-FS-9010-03  |  感光式火灾探测器  |   DSDP010 3BSE005274R1  | TIS600-124

型号：RS-FS-9010-03

类别：货期3-5天/周

发货方式：顺丰/德邦

RS-FS-9010-03 火焰探测器是一种用于探测火灾的重要设备，以下是关于火焰探测器的详细介绍：

定义与工作原理：

火焰探测器，又称感光式火灾探测器，用于响应火灾的光特性，即探测火焰燃烧的光照强度和火焰的闪烁频率。

RS-FS-9010-03 工作原理是通过检测火焰辐射出的特殊波长的紫外线、红外线及可见光等，同时配合对火焰特征闪烁频率来识别，来探测火焰。

分类：

根据火焰的光特性，火焰探测器主要有三种类型：

紫外探测器：对火焰中波长较短的紫外光辐射敏感。

红外探测器：对火焰中波长较长的红外光辐射敏感。

紫外/红外混合探测器：同时探测火焰中波长较短的紫外线和波长较长的红外线。

根据探测波段可分为：单紫外、单红外、双红外、三重红外、红外/紫外、附加视频等火焰探测器。

根据防爆类型可分为：隔爆型、本安型。

技术指标：

防爆等级：CENEL EC EExdⅡ BT5。

灵敏度：0.1m²的可燃性介质（汽油、柴油、航空煤油、乙醇、庚烷），灵敏度有4档量程（15m/30m/45m/60m）可设置。

响应时间：2s。

视角：水平90°，垂直90°。

供电：18～32V DC。

功耗：正常工作时200mA，报警时150mA。

自检功能：自动和手动。

信号输出：4～20mA DC。

继电器触点：报警时2A, 30V DC或250V AC；故障时2A, 30V DC或250V AC。

工作温度：-40～70℃。

优缺点：

光学火焰探测器优点：响应速度快，探测距离远，环境适应性好。

缺点：价格高。

适用场所：

RS-FS-9010-03 火焰探测器适用于无烟液体和气体火灾、产生烟的明火以及产生爆燃的场所，如重工业应用场合、隧道行业、油气罐区、电力行业和石化行业等。

Model: RS-FS-9010-03

Category: Delivery 3-5 days/week

Delivery method: SF Express/Deppon

RS-FS-9010-03 Flame detector is an important equipment for fire detection, the following is a detailed introduction to the flame detector:

Definition and working principle:

The flame detector, also known as the photosensitive fire detector, is used to respond to the light characteristics of the fire, that is, to detect the light intensity of the flame burning and the flicker frequency of the flame.

The working principle of RS-FS-9010-03 is to detect the flame by detecting the special wavelength of ultraviolet, infrared and visible light emitted by the flame, and at the same time to identify the flame characteristic flicker frequency.

Categories:

According to the light characteristics of the flame, there are three main types of flame detectors:

Uv detector: Sensitive to short wavelength ultraviolet radiation in the flame.

Infrared detector: Sensitive to longer wavelength infrared radiation in the flame.

Hybrid UV/IR detector: detects both the shorter wavelength UV and the longer wavelength infrared in the flame.

According to the detection band can be divided into: single ultraviolet, single infrared, double infrared, triple infrared, infrared/ultraviolet, additional video and other flame detectors.

According to the explosion-proof type can be divided into: flameproof type, intrinsic safety type.

Technical indicators:

Explosion-proof class: CENEL EC EExdⅡ BT5.

Sensitivity: 0.1m² of combustible media (gasoline, diesel, aviation kerosene, ethanol, heptane), sensitivity has 4 ranges (15m/30m/45m/60m) can be set.

Response time: 2s.

Viewing Angle: horizontal 90°, vertical 90°.

Power supply: 18 ~ 32V DC.

Power consumption: 200mA in normal operation, 150mA in alarm.

Self-check function: automatic and manual.

Signal output: 4 ~ 20mA DC.

Relay contact: alarm 2A, 30V DC or 250V AC; Failure 2A, 30V DC or 250V AC.

Operating temperature: -40 ~ 70℃.

Advantages and disadvantages:

Optical flame detector advantages: fast response speed, long detection distance, good environmental adaptability.

Disadvantages: High price.

Applicable place:

The RS-FS-9010-03 flame detector is suitable for smokeless liquid and gas fires, open flames that produce smoke, and places where deflagrations occur, such as heavy industry applications, tunnel industries, oil and gas tank farms, power and petrochemical industries.