369-HI-0-0-0-0-0-E  |  电机管理继电器  | SR489-P5-HI-A20  | IS200TREGH1BDB

型号：369-HI-0-0-0-0-0-E

类别：馈线保护继电器

发货方式：：顺丰/联邦

汇款：电汇/西联

数字/开关输入 :6 光隔离

最大环境湿度: 高达 95% 的无冷凝

尺寸 约：11.5 英寸（高）x 5.5 英寸（宽）x 8.5 英寸（长）

显示版本: 增强

保险丝: 3.15 安 H 250 V

输入功率: 110-250伏直流电 100-240伏交流电

相电流输入:1 A 和 5 A 次级

重量 ;8磅

产品描述

369-HI-0-0-0-0-0-E 是通用电气 Multilin 369 系列电机管理继电器的一部分。这款 369 型号及其升级和配件即将停产，并处于最后一次购买状态。在产品线停产后，仍然可以添加一些升级，例如作为防腐蚀、高温、灰尘和潮湿保护层的保形涂层。

Multilin 的 369-HI-0-0-0-0-0-E 旨在保护和控制电机及其配套组件。369 通过各种内置功能实现了这一点，其中一些功能包括：

计量：369 可以监控电压、瓦特、频率和能量等数量，根据生成的数值数据生成保护功能。

活动记录：行程结束后，369 能够立即报告行程原因，以及行程时的温度和数据值，使用户能够分析系统中出现的问题。

旅行前警报：当接地故障、机械堵塞、RTD 过热等原因引起跳闸时，369 可以在跳闸前通知用户。

特点和优势

迅速响应：369-HI-0-0-0-0-0-E 继电器运行迅速，以隔离电路的故障部分，最大限度地减少影响并防止设备损坏和电源中断。

高阻抗故障检测：使用 Arc Sense 技术 (AST) 检测被击落的导体，即使是在导电不良的表面上。AST 算法检测由一些高阻抗故障产生的电弧，并将报警或使断路器跳闸。

适应性强：能够适应不同的电网配置，包括中性点不接地电网、中性点电阻或阻抗接地电网。

通信功能：支持多种通信协议和标准，如IEC 61850、IEC 60870-5-103、Modbus、DNP3等，方便与自动化系统和其他设备进行数据交换。

事件记录和分析：提供详细的事件记录，方便进行事后分析和查找根本原因。

369-HI-0-0-0-0-0-0-e | Motor management relay | SR489-P5-HI-A20 | IS200TREGH1BDB

Model: 369-HI-0-0-0-0-0-0-E

Category: feeder protection relays

Delivery method: SF Express/Federal

Remittance: Wire transfer/Western Union

Digital/switch input :6 optical isolation

Maximum ambient humidity: up to 95% non-condensing

Dimensions: 11.5 inches (H) x 5.5 inches (W) x 8.5 inches (L)

Display version: Enhanced

Fuse: 3.15 anh 250 V

Input power: 110-250 volts DC 100-240 volts AC

Phase current input :1 A and 5 A secondary

Weight; Eight pounds

Product description

The 369-HI-0-0-0-0-0-E is part of the General Electric Multilin 369 series of motor management relays. This 369 model, with its upgrades and accessories, is about to be discontinued and is in last purchase condition. After the product line is discontinued, some upgrades can still be added, such as conformal coatings that act as protection against corrosion, heat, dust and moisture.

Multilin's 369-HI-0-0-0-0-0-E is designed to protect and control the motor and its supporting components. The 369 achieves this through a variety of built-in features, some of which include:

Metering: The 369 can monitor quantities such as voltage, watt, frequency and energy, and generate protection functions based on the generated numerical data.

Activity logging: At the end of the trip, 369 is able to report the reason for the trip immediately, as well as the temperature and data values at the time of the trip, enabling users to analyze problems in the system.

Pre-trip alert: When ground failure, mechanical blockage, RTD overheating and other reasons cause tripping, the 369 can notify the user before tripping.

Characteristics and advantages

Quick response: Relays operate quickly to isolate faulty parts of the circuit, minimize impact and prevent equipment damage and power outages.

High impedance fault detection: Use Arc Sense technology (AST) to detect downed conductors, even on poorly conductive surfaces. The AST algorithm detects the arc generated by some high-impedance fault and will alarm or trip the circuit breaker.

Adaptability: Can adapt to different network configurations, including neutral ungrounded network, neutral resistance or impedance grounded network.

Communication function: 369-HI-0-0-0-0-0-0-E supports a variety of communication protocols and standards, such as IEC 61850, IEC 60870-5-103, Modbus, DNP3, etc., to facilitate data exchange with automation systems and other equipment.

Event recording and analysis: Provides detailed event records for post-hoc analysis and root cause finding.