IC693CPU363RR  |  中央处理器（CPU）  |  IC693CPU340 | IC693CPU323

产品参数:

型号:IC693CPU363

电压:24vdc

电流:0.5 A-CPU

速率:25mhz-内存:240kb

通信端口:1个串口，1个以太网

工作温度:-40℃℃~70℃C

尺寸:12.1厘米x 17.8厘米x 3.1厘米

CPU364 使用闪存固件标准，没有 EPROM，也没有 EEPROM。IC693CPU364 的额定电流为 1A，使用 GE Fanuc Fuse 44A725214–001。CPU364 的最大 CPU 容量为 25 MHz，使用 80386EX 处理器。有 2048 个输入点，2048 个输出点。寄存器存储器可在 128 至 32640 字之间配置。CPU364 具有基于固件的浮点数学运算。

在固件版本 9.1 中，CPU364 添加了 EGD 和可配置的名称解析功能。CPU364 有四个 LED 灯、一个以太网重启按钮、一个标准 CPU 按键开关、三个端口连接器和一个屏蔽接地连接片。四个 LED 指示灯与以太网接口和 PS 端口有关。其中三个指示灯用于以太网：EOK、LAN 和 STAT，1 个指示灯用于 PS 端口。以太网重启按钮有四种用途：

LED测试

重新启动

重新启动并进入软件加载状态

重新启动并进入维护状态

CPU364 有一个端口 1、RS-232、AAUI 端口和 10Base T 端口。这些端口允许 CPU364 连接到终端或终端仿真器（端口 1），通过 IEEE 802.3 连接到外部以太网收发器 （AAUI），并连接到 10Base T 以太网网络。如上所述，CPU364 上的固件存储在闪存中，并通过串行端口连接器加载。这是使用带有加载器和软件的个人计算机完成的。同样，以太网接口固件存储在闪存中，并以相同的方式通过端口 1 连接器加载。

中央处理器（CPU）是计算机系统的核心部件，它的作用主要体现在以下几个方面：

处理指令：CPU通过执行指令来控制整个计算机的运作。

执行操作：CPU负责执行操作，例如算术运算、逻辑运算、移位运算等。

控制时间：CPU负责管理计算机系统中的计时器和中断系统，以确保程序的正确执行和系统的稳定运行。

处理数据：CPU可以从内存或其他外部设备中获取数据，对其进行处理、存储或传输。

总的来说，中央处理器（CPU）是计算机中负责读取指令、对指令译码并执行指令的核心部件，对计算机的性能和功能起着至关重要的作用。

.

Product parameters:

Model :IC693CPU363

Voltage :24vdc

Current: 0.5A -CPU

Speed :25mhz- Memory :240kb

Communication port :1 serial port, 1 Ethernet

Operating temperature :-40℃ ~70℃C

Size :12.1 cm x 17.8 cm x 3.1 cm

The CPU364 uses the flash firmware standard and has neither EPROM nor EEPROM. The IC693CPU364 is rated at 1A and uses GE Fanuc Fuse 44A725214-001. The CPU364 has a maximum CPU capacity of 25 MHz and uses an 80386EX processor. There are 2048 input points, 2048 output points. Register memory can be configured between 128 and 32640 words. The CPU364 has firmware based floating point math.

In firmware version 9.1, CPU364 added EGD and configurable name resolution. The CPU364 has four LED lights, an Ethernet restart button, a standard CPU key switch, three port connectors, and a shielded ground strip. The four LED indicators are related to the Ethernet port and PS port. Three indicators are for Ethernet: EOK, LAN, and STAT, and one indicator is for the PS port. The Ethernet restart button has four uses:

LED test

restart

Restart and enter the software loading state

Restart and enter the maintenance state

The CPU364 has a port 1, RS-232, AAUI port, and 10Base T port. These ports allow the CPU364 to connect to a terminal or terminal emulator (port 1), to an external Ethernet transceiver (AAUI) via IEEE 802.3, and to a 10Base T Ethernet network. As mentioned above, the firmware on the CPU364 is stored in flash memory and loaded via a serial port connector. This is done using a personal computer with a loader and software. Similarly, the Ethernet interface firmware is stored in flash memory and loaded through the port 1 connector in the same way.

The central processing unit (CPU) is the core component of the computer system, and its role is mainly reflected in the following aspects:

Processing instructions: The CPU controls the operation of the entire computer by executing instructions.

Performing operations: The CPU is responsible for performing operations, such as arithmetic operations, logical operations, and shift operations.

Control time: The CPU is responsible for managing the timer and interrupt system in the computer system to ensure the correct execution of the program and the stable operation of the system.

Processing data: The CPU can obtain data from memory or other external devices and process, store, or transmit it.

In general, the central processing unit (CPU) is the core part of the computer responsible for reading, decoding and executing the instructions, and plays a crucial role in the performance and function of the computer.