531X182IFGAHG1  |   变频器 |    集成电路支持l/O 隔离

531X182IFGAHG1变频器的规格如下:

通道数:16

电压:24VDC或12VDC

触发方式:上升沿、下降沿、电平触发

l/O 隔离:支持

通信协议:Modbus RTU

产品描述

531X182IFGAHG1 是由通用电气制造的 VA-5 变频器点火发电机。 如果需要，531X182IFGAHG1还可以通过其许多电阻器将能量转换为热量来消除能量。531X182IFGAHG1使用20个芯片来存储数据代码，告诉电路板该做什么以及何时该做。芯片在各种手册中也称为集成电路（缩写为 IC）或微芯片。531X182IFGAHG1使用器件来控制电路板上的能量流。这些设备称为跳线端口。它们是放置在电路板周围的小金属棒，能量电流可以流动。为了允许或不允许能量向该方向移动，跳线端口具有用作开关的盖子。531X182IFGAHG1 使用各种二极管来引导能量流。每个二极管的一端附近都有一条线。这条小线用于指示能量的移动方向（它在线附近流动）

531X182IFGAHG1 变频器的应用场合包括:

机械控制

自动化控制

过程控制

安全控制

The specifications of the 531X182IFGAHG1 inverter are as follows:

Number of channels :16

Voltage :24VDC or 12VDC

Trigger mode: rising edge, falling edge, level trigger

l/O isolation: Supported

Communication protocol :Modbus RTU

Product description

The 531X182IFGAHG1 is a VA-5 inverter ignition generator manufactured by General Electric. If needed, the 531X182IFGAHG1 can also eliminate energy by converting it into heat through its many resistors. The 531X182IFGAHG1 uses 20 chips to store data codes that tell the board what to do and when to do it. Chips are also referred to in various manuals as integrated circuits (abbreviated as IC) or microchips. The 531X182IFGAHG1 uses devices to control the energy flow on the circuit board. These devices are called jumper ports. They are small metal rods placed around a circuit board where energy and current can flow. To allow or not allow energy to move in that direction, the jumper port has a cover that acts as a switch. The 531X182IFGAHG1 uses a variety of diodes to direct the energy flow. Each diode has a line near one end. This small line is used to indicate the direction of movement of energy (it flows near the line)

Applications for 531X182IFGAHG1 converters include:

Mechanical control

Automatic control

Process control

Safety control