531X307LTBAFG1  |  终端板  |   提供 8 个可配置的控制输入插头

规格

零件编号：531X307LTBAFG1

制造商：通用电气

产品类型：LAN端子板

系列：EX2000

531X307LTBAFG1是GE开发的EX2000 LAN终端板。该组件在控制设备和接触器、指示灯、

按钮和联锁等设备之间提供接口。

I/O 端子接线

所有 I/O 端子都需要尺寸 28 14 AWG 线。

26 芯带状电缆最长可达 20 英尺。

根据应用的不同，输入和输出接线可能根据需要而延长。

LED指示灯

当电源分别施加到电路 IN1 至 IN8 时，LED 指示灯 LED1 至 LED8 亮起。

当继电器 RX1 至 RX7 被激活时，LED17 和 LED23 亮起。

531X307LTBAFG1 输入规格

以下输入电压和电流要求适用于端子 IN1 至 IN8：

4 -10 mA 峰值，24-230 V 交流，60 Hz （G1）

24-250 V 直流（G1 和 G2）：4-8 mA 115 230 V 交流，50 Hz（G1）：4 -10 mA 峰值

通用电气 531X307LTBAFG1 LAN（局域网）终端板是为 531X 系列开发的。该系列的成员是替换板，允许安装在许多GE品牌的驱动器和激励器中。 该卡用作控制驱动器和许多外部连接设备的接口系统。可能的外部设备包括接触器、联锁装置和指示灯。

安装此卡后，可以使用用于进出驱动器的 LAN 信号的接口系统。531X307LTBAKG1 为变频器提供 8 个可配置的控制输入插头。集成卡输入可接受额定电压介于 2 至 240 V 之间的交流和直流电压。然后将这些电压转换为24VDC逻辑信号，然后发送到控制板。该卡的输入插头可以通过 LAN 端子、驱动器控制板和 NTB 端子发送信号。在板载上，该卡具有七个输出。卡上的所有输出都包含低电压和低电流的 C 型继电器触点连接器。

specification

Part number: 531X307LTBAFG1

Manufacturer: General Electric

Product type: LAN terminal board

Series: EX2000

The 531X307LTBAFG1 is an EX2000 LAN terminal board developed by GE. The component is used in control equipment and contactors, indicator lights,

Interfaces are provided between devices such as buttons and interlocks.

I/O terminal connection

All I/O terminals require size 28 14 AWG wire.

The 26-core ribbon cable is up to 20 feet long.

Depending on the application, input and output wiring may be extended as needed.

LED indicator

When the power supply is applied to the circuit IN1 to IN8, the LED indicator LED1 to LED8 lights up.

When relays RX1 to RX7 are activated, LED17 and LED23 light up.

531X307LTBAFG1 Input specifications

The following input voltage and current requirements apply to terminals IN1 to IN8:

4-10 mA peak, 24-230 V AC, 60 Hz (G1)

24-250 V DC (G1 and G2) : 4-8 mA 115 230 V AC, 50 Hz (G1) : 4-10 mA peak

The GE 531X307LTBAFG1 LAN (Local Area Network) terminal board was developed for the 531X series. A member of the family is the replacement board, which allows installation in many GE branded drives and exciters. The card is used as an interface system for controlling drives and many external connected devices. Possible external devices include contactors, interlocking devices, and indicators.

After installing this card, you can use the interface system for LAN signals in and out of the drive. The 531X307LTBAKG1 provides 8 configurable control input plugs for the inverter. The integrated card input accepts AC and DC voltages rated between 2 and 240 V. These voltages are then converted into a 24VDC logic signal, which is then sent to the control board. The input plug of the card can send signals through LAN terminals, driver control board and NTB terminals. On board, the card has seven outputs. All outputs on the card contain low voltage and low current type C relay contact connectors.