IS200TREAH2ACC  |  跳闸继电器  | 保护设备和系统的安全稳定运行

IS200TREAH2ACC 跳闸继电器是一种自动保护电器，其主要功能是在电气设备出现故障或异常工作状态时，切断电路以保护设备和系统的安全稳定运行。常见的跳闸继电器类型包括过流跳闸继电器等。

IS200TREAH2ACC 跳闸继电器通常具有由适当配合的叠绕组和波绕组混合而成的直流电枢绕组，其外形类似青蛙。叠绕组和波绕组的线圈接在同一换向器上并联工作，其中波绕组线圈和叠绕组线圈之间互相起着均压线作用，因此无需另外加接均压线。这种绕组结构有助于改善电机的运行条件，并减轻电刷和换向片接触面上的电流负荷。

在选用跳闸继电器时，需要考虑一些关键因素，如触点负载、触点材料以及继电器的最大电流值等。此外，还需要注意时间继电器的触点容量有限，不能承受过大的负载。为了确保继电器的正常工作，建议在实际使用中进行试验确认。

IS200TREAH2ACC 跳闸继电器在多个领域都有应用，如电动窗帘控制系统、中央空调控制系统、家居安防系统和智能家居系统等。在这些系统中，跳闸继电器通过其电气隔离、电流放大和电压转换等基本功能，实现电路的保护、信号的放大、电机的控制以及开关的转换等功能。

IS200TREAH2ACC trip relay is an automatic protection appliance, its main function is in the electrical equipment failure or abnormal working state, cut off the circuit to protect the safe and stable operation of the equipment and system. Common tripping relay types include overcurrent tripping relays.

The IS200TREAH2ACC trip relay usually has a DC armature winding consisting of a mixture of properly matched lap and wave windings, and its shape is similar to that of a frog. The coil of the lap winding and the wave winding are connected to the same commutator and work in parallel, in which the wave winding coil and the lap winding coil act as a balancing line to each other, so there is no need to add another balancing line. This winding structure helps to improve the operating conditions of the motor and reduce the current load on the contact surface of the brush and the commutator plate.

When selecting a trip relay, some key factors need to be considered, such as contact load, contact material and the maximum current value of the relay. In addition, it is also necessary to note that the contact capacity of the time relay is limited and cannot withstand excessive load. In order to ensure the normal operation of the relay, it is recommended to test and confirm in actual use.

IS200TREAH2ACC trip relays are used in many fields, such as electric curtain control systems, central air conditioning control systems, home security systems and smart home systems. In these systems, the tripping relay realizes the functions of circuit protection, signal amplification, motor control and switch conversion through its basic functions of electrical isolation, current amplification and voltage conversion.