DS2000UPLAG1BBA  | 电源放大器 |增强电源信号的电子设备 |

零件号:DS2000UPLAG1BBA

重量:2.46磅)

标称额定电压:24伏直流电。

输入电压范围:18~32伏直流电:

输入功率:160瓦

输入浪涌能量:大于22焦耳。

输出功率:大于90瓦。

输出电压:+5伏、+12伏和-12伏直流电。

穿越时间:10毫秒。

DS2000UPLAG1BBA 电源放大器是一种用于增强电源信号的电子设备。它的工作原理主要通过输入和输出电阻之间的差异来实现电源信号的放大。电源放大器通常由三个主要部分组成：输入电阻、放大器和输出电阻。

DS2000UPLAG1BBA输入电阻接收外部电源信号，并将其传递给放大器。输入电阻越高，从外部电源接收的信号就越强，放大器就能通过输入电阻更多地接收电源信号。

放大器通过增加输入电阻和降低输出电阻的方式来放大电源信号。放大功能可以通过使用放大管或晶体管等设备来实现。

输出电阻负责将放大后的信号传递给外部设备。输出电阻越低，放大器传递给外部设备的信号就越强，从而实现对电源信号的放大。

DS2000UPLAG1BBA 电源放大器广泛应用于各种领域，包括电力系统、通信系统和航空航天系统等。在电力系统中，它被用于变换器、逆变器、升压变压器等设备中，以提高电能传输效率和降低能量损失。在通信系统中，它被用于微波放大器、射频功率放大器等设备中，以实现高频信号的放大和处理。在航空航天系统中，它被用于卫星电源、导弹电源等设备中，以提供足够的电能支持设备的正常运行。

Part number :DS2000UPLAG1BBA

Weight :2.46 pounds)

Nominal rated voltage :24 volts DC.

Input voltage range :18~32 volts DC:

Input power :160 watts

Input surge energy: greater than 22 joules.

Output power: greater than 90 watts.

Output voltage :+5 volts, +12 volts and -12 volts DC.

Travel time :10 milliseconds.

DS2000UPLAG1BBA Power amplifier is an electronic device used to enhance the power signal. Its working principle is mainly through the difference between the input and output resistance to achieve power signal amplification. A power amplifier usually consists of three main parts: the input resistance, the amplifier, and the output resistance.

The DS2000UPLAG1BBA input resistor receives the external power signal and passes it to the amplifier. The higher the input resistance, the stronger the signal received from the external power supply, and the more the amplifier can receive the power signal through the input resistance.

An amplifier amplifies the power signal by increasing the input resistance and decreasing the output resistance. The amplification function can be achieved by using devices such as amplification tubes or transistors.

The output resistor is responsible for transmitting the amplified signal to the external device. The lower the output resistance, the stronger the signal transmitted by the amplifier to the external device, so as to achieve amplification of the power signal.

DS2000UPLAG1BBA power amplifiers are widely used in various fields, including power systems, communication systems and aerospace systems. In the power system, it is used in converters, inverters, booster transformers and other equipment to improve the efficiency of power transmission and reduce energy loss. In the communication system, it is used in microwave amplifiers, RF power amplifiers and other equipment to realize the amplification and processing of high-frequency signals. In aerospace systems, it is used in satellite power supplies, missile power supplies and other equipment to provide enough electrical energy to support the normal operation of the equipment.