193X803BGG03  | 电源放大器  |  接收外部电源信号

制造者 :GE通用电气

零件/型号 :193X803BGG03

产品类型 :电源放大器

产品描述

193X803BGG03 是 GE 为其变速器驱动系统以及 SCR Drive 等兼容驱动器制造的功率放大器/电源板。

193X803BGG03 上有一个非常宽的前面板，其中包括一个弯曲的手柄，该手柄连接在前表面约三分之二处。该手柄使技术人员可以更轻松地从机架系统中插入或取出电路板以进行维护或更换。该板为银色和黑色，顶部边缘印有板名称、识别号和 GE 标志。该板有一个标有 P-606 的开口。PCB 和前面板使用两个螺钉相互连接。

电源放大器是一种用于增强电源信号的电子设备。它的工作原理主要通过输入和输出电阻之间的差异来实现电源信号的放大。电源放大器通常由三个主要部分组成：输入电阻、放大器和输出电阻。

193X803BGG03输入电阻接收外部电源信号，并将其传递给放大器。输入电阻越高，从外部电源接收的信号就越强，放大器就能通过输入电阻更多地接收电源信号。

放大器通过增加输入电阻和降低输出电阻的方式来放大电源信号。放大功能可以通过使用放大管或晶体管等设备来实现。

输出电阻负责将放大后的信号传递给外部设备。输出电阻越低，放大器传递给外部设备的信号就越强，从而实现对电源信号的放大。

Manufacturer: General Electric

Part/Model :193X803BGG03

Product Type: Power amplifier

Product description

The 193X803BGG03 is a power amplifier/power board manufactured by GE for its transmission Drive systems as well as compatible drivers such as SCR Drive.

The 193X803BGG03 has a very wide front panel that includes a curved handle that is attached about two-thirds of the way to the front surface. The handle makes it easier for technicians to insert or remove circuit boards from the rack system for maintenance or replacement. The board is silver and black, with the board name, identification number, and GE logo printed on the top edge. The plate has an opening marked P-606. The PCB and front panel are connected to each other using two screws.

A power amplifier is an electronic device used to enhance the power signal. Its working principle is mainly through the difference between the input and output resistance to achieve power signal amplification. A power amplifier usually consists of three main parts: the input resistance, the amplifier, and the output resistance.

The 193X803BGG03 input resistor receives the external power supply signal and passes it to the amplifier. The higher the input resistance, the stronger the signal received from the external power supply, and the more the amplifier can receive the power signal through the input resistance.

An amplifier amplifies the power signal by increasing the input resistance and decreasing the output resistance. The amplification function can be achieved by using devices such as amplification tubes or transistors.

The output resistor is responsible for transmitting the amplified signal to the external device. The lower the output resistance, the stronger the signal transmitted by the amplifier to the external device, so as to achieve amplification of the power signal.