IC200MDL740  |    PLC模块  |  提供可靠和有效的控制

GE  IC200MDL740 PLC模块是一款高性能可编程逻辑控制器模块，专为工业自动

化应用而设计。它为各种过程和系统提供可靠和有效的控制。

产品描述: 

GE  IC200MDL740 PLC模块是一款紧凑的多功能模块，提供数字输入/输出(1/0)

功能。它具有12个输入点和8个输出点，允许无缝集成到自动化系统中。凭借其

强大的设计和先进的功能，该模块确保了对连接设备的准确有效控制。

产品参数:

GE  IC200MDL740

输入电压:24V DC

一输出电压:24V DC

.电流消耗:120mA(最大)

-工作温度:-40°℃~ +70°C

-通讯方式:RS-485 Modbus

C200MDL740是通用电气智能平台控制系统解决方家公司生产的VersaMax系列的输出模块。该模块总共有一组16个输出点，每个输出点都支持

离散数字信号。该器件的揄出点可以是正逻辑或源类型。每个输出点执行负载切换并向负载供电。本产品与IC200CHS系列插入式继电器底座兼容

该器件需要辅助电源来支持输出负载切换。5伏输出电源消耗的电流是不能超过45毫安。该模块的工作电压为10.2至30伏直流电(DC)。虽然该设备

具有24伏DC的标称电压，但是它也可以在12伏DC下工作;但是，在12伏DC下工作需要升级到IC200MDL740B或更高版本

每个输出点的电流为0.5安培，“开”状态的响应时间为0.2笔秒，“关”状态的响,应时间为1.0笔秒。不支持通道间隔离，也不支持内部保险丝等任

何保护机制。输出电压降峰值为0.3伏，当工作在30伏DC时，输出泄漏高达0.5毫安。LED灯指示设备状态。这些LED灯需要现场电源才能工作，但不受输出负载条件的影响。这IC200MDL740在24或30伏DC下工作时，也支持热降额。

The GEIC200MDL740 PLC module is a high-performance programmable logic controller module designed for industrial automation

Designed for application. It provides reliable and effective control over a wide range of processes and systems.

Product Description:

The GEIC200MDL740 PLC module is a compact multi-function module that provides digital input/output (1/0).

Features. It has 12 input points and 8 output points, allowing seamless integration into automated systems. By virtue of

With its powerful design and advanced features, the module ensures accurate and effective control of connected devices.

Product parameters :****

Input voltage :24V DC

One output voltage :24V DC

Current consumption :120mA(Max.)

- Operating temperature :-40° C ~ +70°C

- Communication mode :RS-485 Modbus

The C200MDL740 is an output module for the VersaMax family of General Electric Intelligent Platform Control System Solutions. The module has a total set of 16 output points, each of which is supported

Discrete digital signal. The device's mockery point may be positive logic or source type. Each output point performs load switching and supplies power to the load. This product is compatible with the IC200CHS series of plug-in relay mounts

The device requires an auxiliary power supply to support output load switching. The current consumed by the 5-volt output power supply should not exceed 45 MA. The module operates at 10.2 to 30 volts direct current (DC). Although the device

It has a nominal voltage of 24 volts DC, but it can also operate at 12 volts DC; However, operating at 12 volt DC requires an upgrade to IC200MDL740B or later

The current of each output point is 0.5 amps, the response time of the "on" state is 0.2 pen seconds, and the response time of the "off" state is 1.0 pen seconds. It does not support inter-channel isolation or internal fuses

What protection mechanism. The output voltage drop peaks at 0.3 volts, with output leakage up to 0.5 mA when operating at 30 volts DC. LED lights indicate device status. These LED lights require field power to work, but are not affected by output load conditions. The IC200MDL740 also supports thermal derating when operating at 24 or 30 volts DC.