IC694BEM331  |  总线控制器连接  |   单插槽模块

产品描述

GE Fanuc IC694BEM331 Genius 总线控制器连接 PACSystems RX3i 和 Genius I/O 串行总线。除了总线控制器外，总线还将提供：Genius 模块、远程掉落、VersaMax 和现场控制 I/O 站、带有 Genius 总线的 PLC、Genius 手持显示器 （HHM） 和众多主机。Genius 模块和其他设备与 Genius I/O 总线上的每个设备进行 128 字节交换，以自动方式报告故障，包括警报和某些先前定义的问题。然后，总线控制器管理它收到的任何诊断消息，然后由 CPU 例行读取这些消息。如果使用编程软件，则可以在故障表中显示故障。

该IC694BEM331维护所有 Genius 数据报，并且每次总线审查最多可发送 128 字节的全局数据。全局数据是自发和机械广播的数据。系统中最多可集成 8 个 Genius 总线控制器，每个控制器最多可传输 128 字节。

IC694BEM331 是 Genius 总线控制器模块，属于 GE / Emerson PACSystems RX3i 产品系列。

该模块主要用于连接 PACSystems RX3i 和 Genius 串行 I/O 总线。

它是一个单插槽模块，可通过 Genius 块、使用 Genius 总线控制器的 PLC、远程 I/O 滴、

VersaMax 和现场分布式 I/O 进行数据交换。

它能够与每个 Genius I/O 设备交换多达 128 字节的数据，并接收 128 字节的全局数据。

RX3i 系统最多可安装八（8）个 IC694BEM331 模块。

Product description

The GE Fanuc IC694BEM331 Genius Bus controller connects to the PACSystems RX3i and Genius I/O serial buses. In addition to the bus controller, the bus will offer: Genius module, remote drop, VersaMax and field control I/O stations, PLC with Genius Bus, Genius Handheld Display (HHM) and numerous hosts. Genius modules and other devices exchange 128 bytes with each device on the Genius I/O bus to report faults in an automatic manner, including alerts and certain previously defined problems. The bus controller then manages any diagnostic messages it receives, which are then read routinely by the CPU. If programming software is used, the fault can be displayed in the fault table.

The IC694BEM331 maintains all Genius datagrams and can send up to 128 bytes of global data per bus review. Global data is data that is spontaneously and mechanically broadcast. Up to eight Genius bus controllers can be integrated into the system, each of which can transfer up to 128 bytes.

The IC694BEM331 is a Genius bus controller module that belongs to the GE/Emerson PACSystems RX3i product family.

The module is mainly used to connect PACSystems RX3i and Genius serial I/O buses.

It is a single slot module that can be accessed via Genius blocks, PLCS using Genius bus controllers, remote I/O drops,

VersaMax and field distributed I/O for data exchange.

It is capable of exchanging up to 128 bytes of data with each Genius I/O device and receiving 128 bytes of global data.

Up to eight (8) IC694BEM331 modules can be installed in the RX3i system.