IC693CPU351  |  具有单个插槽的 CPU 模块 | 用于将程序输入模块

产品描述

GE Fanuc IC693CPU351 是一款具有单个插槽的 CPU 模块。该模块使用的最大功率为 5V 直流电源，所需负载为 890 mA。此模块以 25 MHz 的处理速度执行其功能，使用的处理器类型为 80386EX。此外，该模块必须在 0°C –60 °C 的环境温度范围内运行。 该模块还提供 240K 字节的内置用户存储器，用于将程序输入模块。可用于用户内存的实际大小主要取决于分配给 %AI、%R 和 %AQ 的数量。

该IC693CPU351利用闪存和RAM等内存存储来存储数据，并与PCM / CCM兼容。它还支持固件版本 9.0 和更高版本的浮点数学等功能。它包含 2000 多个计时器或计数器，用于测量经过的时间。IC693CPU351还配备了备用电池时钟。此外，该模块实现的扫描速率为 0.22 m-sec/1K。 IC693CPU351包含 1280 位的全局存储器和 9999 字的寄存器存储器。此外，为模拟输入和输出提供的存储器是固定的，即 9999 字。存储器还分配给 4096 位和 256 位的内部和临时输出线圈。IC693CPU351由三个串行端口组成，支持SNP从站和RTU从站。

技术规格

处理器速度 ： 25兆赫

I/O 积分 ： 2048

寄存器存储器 ： 240KB字节

浮点数学： 是的

32 BIT系统

处理器： 80386EX

IC693CPU351支持大量 I/O，特别是 2048 个离散输入点 （%I）;2048 离散输出点 （%Q） 和模拟 I/O 字因所使用的软件而异，但最大可配置模拟 I/O 为 32， 640 字。此 CPU 可用的其他内部寄存器数量为 1280 位二进制全局存储器;4096 位存储线圈;256位临时输出线圈;128 位系统状态参考;最多 32640 字的寄存器存储器和 28000 字的系统寄存器，仅可用于参考表查看。

该模块化 CPU 可配置为 I/O 扩展或远程 I/O 底板之间的通信和执行 I/O 数据交换。具体来说，七（7）和/或I/O扩展或远程I.O基板。为了与人机界面 （HMI） 或监控和数据采集系统 （SCADA） 等可视化系统以及其他自动化设备进行通信，IC693CPU351配有三 （3） 个串行端口。一 （1） 个串行端口位于支持 SNP/SNPX 从站的电源连接器上，而端口 1 和 2 支持 RTU 从站、SNP/SNPX 主/从协议。该模块化 CPU 还支持通信模块的安装。

Product description

The GE Fanuc IC693CPU351 is a CPU module with a single slot. The module uses a maximum power of 5V DC supply and a required load of 890 mA. This module performs its functions at a processing speed of 25 MHz, using a processor type of 80386EX. In addition, the module must operate in the ambient temperature range of 0°C - 60 °C. The module also provides 240K bytes of built-in user memory for entering programs into the module. The actual amount of memory available to the user depends primarily on the amount allocated to %AI, %R, and %AQ.

The IC693CPU351 utilizes memory storage such as flash and RAM to store data and is compatible with PCM/CCM. It also supports features such as floating point math for firmware version 9.0 and later. It contains more than 2,000 timers or counters to measure the elapsed time. The IC693CPU351 also comes with a backup battery clock. In addition, the module achieves a scan rate of 0.22m-sec /1K. The IC693CPU351 contains 1280 bit global memory and 9999 word register memory. In addition, the memory provided for analog input and output is fixed, i.e. 9999 words. Memory is also allocated to 4096-bit and 256-bit internal and temporary output coils. The IC693CPU351 consists of three serial ports and supports SNP slave and RTU slave.

Technical specification

Processor speed: 25 MHZ

I/O score: 2048

Register memory: 240KB bytes

Floating point math: Yes

32-bit system

Processor: 80386EX

The IC693CPU351 supports a large number of I/ OS, especially 2048 discrete input points (%I). 2048 Discrete output points (%Q) and analog I/O words vary depending on the software used, but the maximum configurable analog I/O is 32,640 words. The number of other internal registers available for this CPU is 1280 bits of binary global memory; 4096-bit storage coil; 256-bit temporary output coil; 128-bit system status reference; Register memory of up to 32,640 words and system registers of 28,000 words are available for reference table viewing only.

The modular CPU can be configured for I/O expansion or communication and performing I/O data exchange between remote I/O baseboards. Specifically, seven (7) and/or I/O extensions or remote I.O baseboards. For communication with visualization systems such as Human Machine Interface (HMI) or Supervisory Control and Data Acquisition System (SCADA), as well as other automation devices, the IC693CPU351 is equipped with three (3) serial ports. One (1) serial port is located on a power connector that supports SNP/SNPX slave stations, while ports 1 and 2 support RTU slave stations and SNP/SNPX master/slave protocols. The modular CPU also supports the installation of communication modules.