IC200ALG432  | 混合模拟模块 |  配备 4 个通道和 2 个输出通道

零件编号 ：IC200ALG432

描述：模拟混合模块

电压 ：10 伏直流电

更新速率： 0.4 毫秒

GE Fanuc IC200ALG432模块是一个混合模拟模块，采用 10 伏直流电源供电。它是一个 12 位模块，配备 4 个通道和 2 个输出通道。模拟量模块的更新速率时间为0.4毫秒，输入的响应时间为5毫秒。该模拟模块需要外部电源来为输出供电。模块的输入由收发器的外部电源供电。处理操作的模块中存在 CPU。IC200ALG432模块的正面有LED指示灯，显示电源和背板电流。该混合模块不会发生热降额。IC200ALG432模块在包括负载电流在内的常规操作中总共消耗 160 毫安的电流。该模块的诊断功能有助于检测用户侧电源的损耗。

IC200ALG432模拟混合模块是一种电子设备，具有多种功能，包括模拟信号的传输、回路供电、模块供电等。这种模块可以用于连接多种模拟信号设备，如现场仪表、调节阀、电动门等，并对来自危险场合的开关信号进行隔离输入输出。

具体来说，IC200ALG432模拟混合模块可以实现以下功能：

信号传输：IC200ALG432模块能够接收和传输各种电压、电流、电偶、电阻等信号，可配合各种热电偶、热电阻、两线制变送器、三、四线制变送器、单元仪表和阀门等设备使用。

回路供电和模块供电：模块为连接的设备和自身提供必要的电源支持。

隔离输入输出：主要用于对电机状态、开关状态等强电信号进行隔离输入和电磁阀、电机的控制输出，以提高系统的安全性和稳定性。

Part number: IC200ALG432

Description: Analog hybrid module

Voltage: 10 volts DC

Update rate: 0.4 ms

The GE Fanuc IC200ALG432 module is a hybrid analog module powered by a 10 volt DC power supply. It is a 12-bit module equipped with 4 channels and 2 output channels. The update rate time of the analog module is 0.4 ms and the response time of the input is 5 ms. The analog module requires an external power supply to power the output. The input to the module is powered by the transceiver's external power supply. Cpus exist in the module that processes operations. The front of the IC200ALG432 module has an LED indicator indicating the power supply and backplane current. The hybrid module does not undergo thermal derating. The IC200ALG432 module consumes a total of 160 milliamps of current during normal operation, including load current. The module's diagnostic function helps detect the loss of the power supply on the user side.

The IC200ALG432 analog hybrid module is an electronic device with a variety of functions, including analog signal transmission, loop power supply, module power supply, etc. This module can be used to connect a variety of analog signal devices, such as field meters, regulating valves, electric doors, etc., and to isolate the input and output of switching signals from hazardous situations.

Specifically, the IC200ALG432 analog hybrid module enables the following functions:

Signal transmission: IC200ALG432 module can receive and transmit a variety of voltage, current, electric couple, resistance and other signals, can be used with a variety of thermocouples, thermal resistors, two-wire transmitters, three, four wire transmitters, unit instruments and valves and other equipment.

Loop power supply and module power supply: The module provides the necessary power support for the connected device and itself.

Isolated input and output: It is mainly used for isolating input and control output of electromagnetic valve and motor for strong electric signals such as motor state and switching state to improve the safety and stability of the system.