IC200ALG321  | 4点模拟电压输出模块 | 支持单端接线

类型 ：输出模块

输出 ：4 个模拟电流源输出

产品描述： 4点模拟电压输出模块

电压： 18 至 30 VDC

接线配置 ：单端

电流消耗 ；最大 210 mA

输出信号，：标称值 0-10 伏直流电

输出电流： 0 至 10.24V DC

IC200ALG321是 VersaMax 产品系列中的电压输出模块。该模块是一个 12 位分辨率模块，可生成 0-10 VDC 电压信号，主要用于调制控制设备，如阀门、变频驱动器 （VFD）、百叶窗、阻尼器、定位器以及用于处理本地面板仪表、记录仪或数据记录器、信号分配器和隔离器以及类似电气设备的信号的再传输。

该IC200ALG321产生 0-10 VDC 输出电压，分辨率为 12 位或数字分辨率为 2.5 mV，最大通道更新速率为 0.3 ms。该模块支持单端接线，并具有一组输出通道，组隔离额定值为 250 VAC，连续和 1500 VAC，持续时间为 1 。

Type: Output module

Output: 4 analog current source outputs

Product description: 4 point analog voltage output module

Voltage: 18 to 30 VDC

Wiring configuration: single end

Current consumption; Max. 210 mA

Output signal: nominal value 0-10 volts DC

Output current: 0 to 10.24V DC

The IC200ALG321 is a voltage output module in the VersaMax product family. The module is a 12-bit resolution module that can generate 0-10 VDC voltage signals, mainly for modulation control devices, Such as valves, variable frequency drivers (VFDS), blinds, dampers, positioners, and signal retransmission for processing local panel meters, loggers or data loggers, signal splitters and isolators, and similar electrical equipment.

The IC200ALG321 produces 0-10 VDC output voltages with 12-bit or digital resolution of 2.5 mV and a maximum channel update rate of 0.3 ms. The module supports single-ended wiring and has a set of output channels with group isolation ratings of 250 VAC, continuous and 1500 VAC with a duration of 1.