IC200ALG261 | 具有 8 个差分通道的模拟输入模块

制造者： GE发那科

系列； 万能

零件编号; IC200ALG261

产品类型: 模拟量输入模块

通道数 ：8

GE Fanuc Versamax IC200ALG261模块是具有 8 个差分通道的模拟输入模块。它可用于可编程逻辑控制器或PLC。由于它有 8 个通道，因此IC200ALG261模拟输入模块可以充当最多 8 个差分电压输入的接口设备。IC200ALG261模拟量输入模块由 Versamax PLC 中的背板电源供电，这意味着它不需要外部电源即可正常运行。但是，如果用户将模块安装在带有收发器的系统中，则用户还必须为收发器安装外部电源。该输入模块在 5 伏电压下消耗 200 毫安的背板电流。

IC200ALG261模拟量输入模块是一款将远程现场的模拟量信号采集至计算机的设备。它利用RS-485总线作为数据通信线路，提供模拟量转485功能，能够同时将模拟量输入至模块，并通过RS-485总线传输至计算机。由于采用RS-485接口作为通信接口，其能够多个模块组合传输更多路数模拟量信号，并且能够在485线路上分散配置，采用地址码进行区分，可以直接接入MODBUS RTU协议的组态软件。

IC200ALG261模拟量输入模块的主要功能是收集模拟信号，如电压、电流、热阻、热电偶、温度等模拟值，并通过总线传输给计算机的智能模块。此外，它还具有以下特点：

支持标准Modbus RTU通讯协议。

支持电流或电压切换采集，内部跳线可切换采集模式。

支持多种采集量程、各类组态软件对接。

4路模拟量输入、2路数字量输出转RS485。

支持-40~85°宽电压DC5~35V供电，支持导轨安装。

Manufacturer: GE Fanuc

Series; all-purpose

Part number; IC200ALG261

Product type: Analog input module

Number of channels: 8

The GE Fanuc Versamax IC200ALG261 module is an analog input module with 8 differential channels. It can be used with programmable logic controllers or PLCS. Since it has 8 channels, the IC200ALG261 analog input module can act as an interface device for up to 8 differential voltage inputs. The IC200ALG261 analog input module is powered by the backplane power supply in the Versamax PLC, which means that it does not require an external power supply to operate properly. However, if the user installs the module in a system with a transceiver, the user must also install an external power supply for the transceiver. The input module consumes 200 mA of backplane current at 5 volts.

IC200ALG261 analog input module is a device that collects analog signals from remote field to computer. It uses RS-485 bus as a data communication line to provide analog to 485 function, which can simultaneously input analog to the module and transmit it to the computer through the RS-485 bus. As the RS-485 interface is used as the communication interface, it can combine multiple modules to transmit more analog signals, and can be distributed on the 485 line, using the address code to distinguish, and can directly access the configuration software of MODBUS RTU protocol.

The main function of the IC200ALG261 analog input module is to collect analog signals, such as voltage, current, thermal resistance, thermocouple, temperature and other analog values, and transmit them to the intelligent module of the computer through the bus. In addition, it has the following features:

Support standard Modbus RTU communication protocol.

Support current or voltage switching acquisition, internal jumper can switch acquisition mode.

Support a variety of acquisition ranges, various configuration software docking.

4 analog inputs, 2 digital outputs to RS485.

Support -40~85° wide voltage DC5~35V power supply, support guide rail installation.