IS200DAMCG1ABB  | 电路板组件 | 使用 620 帧驱动电源

产品描述

IS200DAMAG1BBB是用于 Mark VI 涡轮控制系统的 Innovation 系列电路板中的一个电路板组件。Mark VI是通用电气公司为涡轮机控制而创建和分销的最后一批Speedtronic系统之一。

该IS200DAMAG1BBB用作栅极驱动器放大器和接口。该板用作IGBT等功率开关设备与控制机架之间的接口。该板使用 620 帧驱动电源。

该IS200DAMAG1BBB放大栅极驱动最后级的电流。通常，每个驱动器使用其中的三块板。该板包括四个 LED，其中两个黄色指示上下 IGBT 何时导通，两个绿色指示上下 IGBT 何时熄灭。该板还包括用于栅极信号、公共信号和集电极信号的连接器。

该IS200DAMAG1BBB被认为是对静电敏感的板。为了避免静电积聚造成损坏，处理此组件的人员应使用静电敏感处理技术。这包括使用腕带并确保在接触设备之前已将设备从通电设备中取出。AX Control 使用防静电袋运送此板，以符合这些操作指南。如果您要存放此组件的任何时间，我们建议您将袋子用作存储的一部分。

Product description

The IS200DAMAG1BBB is a circuit board component in the Mark VI Innovation series of circuit boards for turbine control systems. The Mark VI was one of the last Speedtronic systems created and distributed by GE for turbine control.

The IS200DAMAG1BBB is used as a gate driver amplifier and interface. The board is used as an interface between power switchgear such as IGBTs and the control rack. The board uses 620 frame drive power.

The IS200DAMAG1BBB amplifier gate drives the current of the final stage. Typically, three of these boards are used for each drive. The board consists of four leds, two of which are yellow to indicate when the upper and lower IGBTs are on and two of which are green to indicate when the upper and lower IGBTs are off. The board also includes connectors for gate signals, common signals, and collector signals.

The IS200DAMAG1BBB board is considered to be electrostatic sensitive. In order to avoid damage caused by static buildup, the person handling this component should use electrostatic sensitive processing techniques. This includes using a wristband and ensuring that the device has been removed from the powered device before touching it. AX Control ships this board using an anti-static bag to comply with these operating guidelines. If you are going to store this component for any time, we recommend that you use the bag as part of the storage.