DS200CPCAG1ABB  | 接触器导频卡  具有四个接线端子

零件编号 ：DS200CPCAG1ABB

功能描述： 接触器导频卡

功能首字母缩略词： CPCA公司

PCB涂层 ：普通涂层

产品描述

GE 接触器先导板DS200CPCAG1ABB具有一个 12 针连接器和两个 2 针连接器。它还具有四个接线端子，最多可连接 12 根信号线。GE 接触器先导板DS200CPCAG1ABB还装有 24VDC 15A 插座电源继电器。

继电器内部有活动部件，因此在驱动器中安装板时需要仔细考虑。如果继电器撞到驱动柜内的金属结构或其他组件，则很容易损坏。继电器很高，从板子表面突出，很容易被击中。将主板滑入驱动器机柜时，请确保您可以清楚地看到主板和机柜内部。慢慢插入电路板并将其与机架上的螺钉对齐。一只手将螺钉插入孔中，另一只手转动螺丝刀以固定螺丝。但是，不要将电路板固定得太紧，以免螺钉使电路板破裂而损坏电路板。如果垫圈已提供或在有缺陷的板上使用过垫圈，请使用垫圈。

产品描述

DS200CPCAG1ABB GE接触器导引板为GE接触器的安装提供指导和支撑。确保接触器在电气柜或设备中的正确位置。

特征

精确的尺寸设计，确保与GE接触器的完美配合。

高强度材料制成，具有良好的机械强度，

表面处理工艺，提高产品的耐腐蚀性

易于安装，节省维护时间。

DS200CPCAG1ABB GE接触器导引板是ABB公司专为GE系列接触器设计的一款辅助安装部件

通用电气接触器引线板DS200cpcag1abb具有一个12针连接器和两个2针连接器。它还具有四个终端块,以连接最多12个信号线,通用电气接触器驾驶员板

DS200cpcag1abb还配有24VDC15A插座电源继电器。

Part number: DS200CPCAG1ABB

Function description: contactor pilot card

Functional Acronym: CPCA Corporation

PCB coating: Ordinary coating

Product description

The GE contactor pilot plate DS200CPCAG1ABB has one 12-pin connector and two 2-pin connectors. It also has four terminals and can connect up to 12 signal wires. The GE contactor pilot board DS200CPCAG1ABB is also equipped with a 24VDC 15A socket power relay.

There are moving parts inside the relay, so careful consideration is required when installing the plate in the driver. If the relay hits the metal structure or other components in the drive cabinet, it is easily damaged. The relay is tall and protrudes from the surface of the board, making it easy to be hit. When sliding the motherboard into the drive cabinet, make sure that you can clearly see the motherboard and the inside of the cabinet. Slowly insert the board and align it with the screws on the rack. Insert the screw into the hole with one hand and turn the screwdriver with the other hand to secure the screw. However, do not fix the circuit board too tightly, so that the screw will not break the circuit board and damage the circuit board. If a washer has been provided or used on a defective plate, use a washer.

Product description

DS200CPCAG1ABB GE Contactor Guide plate provides guidance and support for GE contactor installation. Make sure the contactor is in the correct position in the electrical cabinet or equipment.

trait

Precise dimensional design ensures perfect fit with GE contactors.

Made of high strength material, with good mechanical strength,

Surface treatment process, improve the corrosion resistance of the product

Easy to install and save maintenance time.

The DS200CPCAG1ABB GE Contactor Guide plate is an auxiliary installation component designed by ABB for the GE contactor series

The GE contactor lead board DS200cpcag1abb has one 12-pin connector and two 2-pin connectors. It also features four terminal blocks to connect up to 12 signal lines to the GE contactor driver board

The DS200cpcag1abb is also equipped with a 24VDC15A socket power relay.