DS200SIOBH1ACA  |  I/O 控制板   具有 20 个跳线和 3 个开关块

产品描述

GE I/O 控制板DS200SIOBH1AAA具有 20 个跳线和 3 个开关块，每个块中有 6 个开关，总共 18 个开关。它还装有 1 个 LED 和 1 个 40 针连接器。GE I/O控制板上的LED指示板执行的处理DS200SIOBH1AAA，并在对板进行故障排除时提供第一步。当驱动器通电时，您可以直观地检查 LED 的状态并了解电路板的健康状况。如果发现主板未按预期工作，则可以使用驱动器上的故障排除工具查看主板是否不工作，或者驱动器中的其他组件是否导致问题。

GE DS200SI0BH1ACA是一款专业的模拟输入/输出模块。该模块通过多种接口与其他设备进行通信，可以用于多种应用场合

规格

输入通道:16

输出通道:16

电压范围:-10V至10V

分辨率:16位

采样速率:100ksps

和

技术说明

GE DS200SI0BH1ACA采用了先进的模拟电路设计，可以稳定地蝓出高箱度信号。同时，该模块还支持多种通信协议，包括RS-232、RS-485、以大网等

产品参数

工作电压:+24VDC

工作温度:-40℃至+70℃

产品尺寸:125mmx80mmx27mm

”产品重量:约200g

Product description

The GE I/O control board DS200SIOBH1AAA has 20 jumpers and 3 switch blocks with 6 switches in each block for a total of 18 switches. It is also equipped with 1 LED and 1 40-pin connector. The LED dashboard on the GE I/O control board performs the processing DS200SIOBH1AAA and provides the first step when troubleshooting the board. When the driver is powered on, you can visually check the status of the LED and understand the health of the board. If you find that the motherboard is not working as expected, you can use the troubleshooting tool on the drive to see if the motherboard is not working or if other components in the drive are causing the problem.

The GE DS200SI0BH1ACA is a professional analog input/output module. The module communicates with other devices through a variety of interfaces and can be used in a variety of applications

specification

Input channel :16

Output channel :16

Voltage range :-10V to 10V

Resolution :16 bits

Sampling rate :100ksps

and

Technical specification

GE DS200SI0BH1ACA adopts advanced analog circuit design, which can stably produce high box signal. At the same time, the module also supports a variety of communication protocols, including RS-232, RS-485, and large network

Product parameter

Operating voltage :+24VDC

Operating temperature :-40℃ to +70℃

Product size :125mmx80mmx27mm

Product weight: about 200g