DS200SDCIG2AHB | SDCI 直流电源和仪表板  驱动器

制造者： GE通用电气

系列 ：马克五世

零件编号 ：DS200SDCIG2AHB

产品类型 ：SDCI 直流电源和仪表板

说明书： GEI-100173

产品描述

通用电气直流电源和仪表板DS200SDCIG2AHB用作 DC2000 型号驱动器的接口。DS200SDCIG2AHB容易被静电损坏。但是，您可以遵循一些一般规则来避免静电荷造成的损坏。在安装电路板之前，请将电路板保持在静态保护包装中，并将其触摸在未上漆的金属表面上，该表面可能是驱动器或其他设备或结构。让它接触金属表面 2 秒钟，让静电从电路板上排出。

请勿将电路板放在防静电保护包之外。只需将其直接放置在驱动器中，即可减少静电积聚的机会。此外，握住电路板的外边缘，切勿触摸组件或焊料。

拆卸有缺陷的电路板需要一些必要的步骤，以防止触电、电烧伤或安全隐患。在接触驱动器内的任何组件之前，请确保已从驱动器中移除所有电流。按照为您的站点建立的关闭程序进行操作，并验证是否已移除所有电流，请使用电流测试仪。

Manufacturer: General Electric

Series: Mark V

Part number: DS200SDCIG2AHB

Product Type: SDCI DC power supply and Instrument panel

Instruction Manual: GEI-100173

Product description

The GE DC power supply and dashboard DS200SDCIG2AHB serve as the interface for the DC2000 model driver. DS200SDCIG2AHB is easily damaged by static electricity. However, there are some general rules you can follow to avoid damage caused by electrostatic charges. Before installing the board, keep the board in static protective packaging and touch it on an unpainted metal surface, which may be a drive or other device or structure. Let it touch the metal surface for 2 seconds to allow static electricity to escape from the board.

Do not leave the circuit board outside the ESD protection bag. Simply placing it directly in the drive reduces the chance of static buildup. In addition, hold the outer edge of the board and never touch the components or solder.

Removing a defective circuit board requires a number of necessary steps to prevent electric shock, electrical burns, or safety hazards. Before touching any components inside the drive, ensure that all current is removed from the drive. Follow the shutdown procedure established for your site and verify that all current has been removed by using a current tester.