DS200IQXSG1AAA  |  逆变器缓冲板  具有 8 个端子连接器

型号：DS200IQXSG1AAA

特征：

高温耐受，抗老化。

良好的电气绝缘性能。

高机械强度，抗冲击、抗振动。

环保材料，符合国际环保标准。

DS200IQXSG1AAA GE逆变器鼻油板是一种专为GE逆变器设计的专用配件

通用逆变器鼻油板DS200gxsgaaa具有8个终端连接器。终端通过E8标记为E1，该通用逆变器鼻油板DS200lqxsgaaa还包括一个8针连接器和

个膜电容安装在板上。板是安装在板柜中的多块板之一,尺寸为6.25乘5英寸,角上的四个孔与板架上匹配的安装孔对齐。如果没有新的螺丝,使用

固定旧板的螺丝。

由于板材和驱动器中的移动部件所产生的热量,在安装驱动器时,冷却是一个重要的考虑因素。驱动器必须有清洁的空气源,可以自由地通过驱动器

来保持组件在允许的温度范围内。驱动器的设计使凉爽和清洁的空气进入底部的驱动器,并通过驱动器内部上升。它在部件周围和上方传递,并从

驱动器中吸收热量。

产品描述

GE 逆变器缓冲板DS200IQXSG1AAA具有 8 个端子连接器。端子标记为 E1 到 E8。GE逆变缓冲板DS200IQXSG1AAA还包含1个8针连接器和1个安装在板上的薄膜电容器。该板是安装在板柜中的多块板之一。尺寸为 6.25 x 5 英寸，角落的四个孔与板架上的匹配安装孔对齐。如果没有新螺钉，请使用固定旧板的相同螺钉。

DS200IQXSG1AAA由于驱动器中的电路板和运动部件会产生热量，因此在安装驱动器时，冷却是一个重要的考虑因素。变频器必须具有可以自由流过变频器的清洁空气源，以使组件保持在允许的温度范围内。驱动器的设计使凉爽和清洁的空气从底部进入驱动器，并通过驱动器内部上升。它绕过组件并越过组件，并将热量从驱动器中带走。

Model: DS200IQXSG1AAA

Features:

High temperature tolerance, anti-aging.

Good electrical insulation.

High mechanical strength, shock and vibration resistance.

Environmentally friendly materials, in line with international environmental standards.

The DS200IQXSG1AAA GE inverter nose oil plate is a special accessory designed for GE inverters

The universal inverter nose oil plate DS200gxsgaaa has 8 terminal connectors. Terminal marked E1 via E8, the universal inverter nose oil plate DS200lqxsgaaa also includes an 8-pin connector and

A membrane capacitor is mounted on the board. The board is one of several boards installed in the board cabinet and measures 6.25 by 5 inches, with four holes in the corners aligned with matching mounting holes on the board frame. If there are no new screws, use them

Screws to hold old plates in place.

Due to the heat generated by the plates and moving parts in the drive, cooling is an important consideration when installing the drive. The drive must have a clean air source that can flow freely through the drive

To keep the components within the permitted temperature range. The drive is designed so that cool and clean air enters the bottom of the drive and rises through the inside of the drive. It passes around and above the parts, and from

The drive absorbs heat.

Product description

The GE Inverter buffer board DS200IQXSG1AAA has 8 terminal connectors. The terminals are labeled E1 to E8. The GE Inverter buffer board DS200IQXSG1AAA also contains an 8-pin connector and an on-board film capacitor. The board is one of several boards installed in the board cabinet. The dimensions are 6.25 x 5 inches and the four holes in the corners are aligned with the matching mounting holes on the plate rack. If no new screws are available, use the same screws that secured the old plate.

Because the circuit board and moving parts in the driver generate heat, cooling is an important consideration when installing the driver. The inverter must have a clean air source that can flow freely through the inverter to keep the components within the permitted temperature range. The drive is designed so that cool and clean air enters the drive from the bottom and rises through the inside of the drive. It goes around the component and over the component and takes the heat away from the drive.