DS200CTBAG1A  |  印刷电路板  通用数据处理器的终端板

该DS200CTBAG1A是印刷电路板，是GE Speedtronic MKV燃气轮机控制系统的一部分。 它旨在成为系统通用数据处理器的终端板。该卡位于系统的 C 核内。它的主要终端信号是马。输入，马。输出、与IONET的通信链路以及与ARCNET处理器的通信链路。卡上有一个 RS-232 9 针 d-shell 连接串行端口，可进行 TIMN 诊断。卡的每个短端上都有两个工厂钻孔，用于将其安装到位。电路板上还有23个红色压敏电阻和7个二极管。在DS200CTBAG1A PCB的组件中也有许多电阻器;这些电阻器与本DS200CTBAG1A PCB的电容器和二极管类似，已被放置在本DS200CTBAG1A产品的组件中，以提供基本的残余电压限制和抑制。 该DS200CTBAG1A作为终端模块或模拟终端板的作用，需要在其组件中包含许多 Mark V 系列连接器。其中一些连接器包括：

8PL STCA 板 IONET 信号连接器

JAA TCCA 板输出信号连接器

JAI COREBUS 连接器

JAJ COREBUS连接器

JBB TCCA板轴电压和电流信号连接器

JEE STCA 板 COREBUS 连接器

JPD TCPD 板电源信号连接器

JX TCDA板IONET信号连接器

6PL连接器

The DS200CTBAG1A is a printed circuit board that is part of the GE Speedtronic MKV gas turbine control system. It is designed to be the terminal board of the system's general data processor. The card is located in the C core of the system. Its main terminal signal is the horse. Enter, Ma. Output, communication link with IONET, and communication link with ARCNET processor. The card has an RS-232 9-pin d-shell connected to the serial port for TIMN diagnostics. There are two factory holes on each short end of the card to fit it in place. There are also 23 red varistors and seven diodes on the board. There are also many resistors in the components of the DS200CTBAG1A PCB; These resistors, similar to the capacitors and diodes of this DS200CTBAG1A PCB, have been placed in the components of this DS200CTBAG1A product to provide basic residual voltage limitation and suppression. The DS200CTBAG1A's role as a terminal module or analog terminal board requires the inclusion of a number of Mark V Series connectors in its components. Some of these connectors include:

8PL STCA board IONET signal connector

JAA TCCA output signal connector

JAI COREBUS connectors

JAJ COREBUS connector

JBB TCCA board shaft voltage and current signal connector

JEE STCA board COREBUS connector

JPD Power signal connector for the TCPD board

JX TCDA board IONET signal connector

6PL connector