IC697MDL254  |  输入模块  具有 10 毫安的输入电流

品牌 :GE发那科

系列 :90-70系列

零件编号 :IC697MDL254

品牌 :GE智能平台/GE发那科

产品类型 :输入模块

额定电压: 48 伏交流电

输入: 32

IC697MDL254输入模块主要用于接收信号输入，并将其作为系统的一部分。其根据输入信号的不同，可以分为开关量输入和模拟量输入两种类型。

模拟量输入模块则主要用于接收电流量或电压量信号。例如，一些厂家的非编码探测器在报警时会输出电流量信号，该信号可以被模拟量输入模块接收并输入到系统中。

此外，IC697MDL254输入模块在建设工程领域中也发挥着重要作用。在设计阶段，设计师可以使用输入模块来输入和编辑项目的基本信息，包括项目名称、地理位置、规模等。在施工阶段，施工人员则可以使用输入模块来记录施工过程中的关键信息，如材料使用情况、人员配置、进度等。

GE Fanuc IC697MDL253 输入模块不需要 DIP 开关或跳线进行配置。配置取决于 Windows NT 或 Windows 95 操作系统或通过 SNP 或 TCP/IP 端口的 MS-DOS 软件。其编程软件预装在编程设备上。GE Fanuc IC697MDL253 输入模块可与各种输入设备配合使用，例如电子 2 线或 3 线接近开关、限位开关和选择开关。它在导通状态下具有 10 毫安的输入电流，在关断状态下具有 2 毫安的泄漏电流。该模块首选 3 线接近开关，因为它们具有低导通状态压降和低关断状态电流泄漏。GE Fanuc IC697MDL253 输入模块设计用于 2 线设备，包括由信号连接供电的 2 线接近开关。

Brand :GE Fanuc

Series :90-70 series

Part number :IC697MDL254

Brand :GE Intelligent Platform /GE Fanuc

Product type: Input module

Rated voltage: 48 volts AC

Input: 32

The IC697MDL254 input module is mainly used to receive signal input and use it as part of the system. According to the different input signals, it can be divided into switching input and analog input two types.

The analog input module is mainly used to receive the current or voltage signal. For example, some manufacturers of non-coding detectors will output a current flow signal when the alarm, the signal can be received by the analog input module and input into the system.

In addition, the IC697MDL254 input module also plays an important role in the field of construction engineering. During the design phase, designers can use the input module to enter and edit the basic information of the project, including the project name, geographical location, size, etc. During the construction phase, the construction personnel can use the input module to record key information during the construction process, such as material usage, staffing, progress, etc.

The GE Fanuc IC697MDL253 input module does not require DIP switches or jumpers for configuration. Configuration depends on Windows NT or Windows 95 operating systems or MS-DOS software via SNP or TCP/IP ports. Its programming software is pre-installed on the programming device. The GE Fanuc IC697MDL253 input module can be used with various input devices, such as electronic 2-wire or 3-wire proximity switches, limit switches and select switches. It has an input current of 10 MA in the on state and a leakage current of 2 MA in the off state. 3-wire proximity switches are preferred for this module because they have low on-state voltage drop and low off state current leakage. The GE Fanuc IC697MDL253 input module is designed for 2-wire devices and includes a 2-wire proximity switch powered by a signal connection.