IC693MDL753   90-30 系列   可编程逻辑控制器 （PLC）

品牌：GE发那科

系列 ：90-30系列

制造者： 通用电气发那科;艾默生自动化 （Current）

产品描述分立式输出模块

零件编号：IC693MDL753

产品描述：分立式输出模块

不。输出组数 四 （4）

产品类型： 数字 I/O

通道数： 三十二 （32）

兼容性： GE Fanuc 90-30 PLC

IC693MDL753是 90-30 系列可编程逻辑控制器 （PLC） 系列的数字输出模块。该模块具有三十二 （32） 个正逻辑输出通道，可产生 102 - 28.8 输出电压范围，标称电压为 12 - 24 VDC。该IC693MDL753以前由 GE Fanuc Automation 制造，现已被 Emerson Automation 收购。该模块专门带有输出分组，四 （4） 组，每组八 （8） 个输出。每个输出组具有 250 V 隔离和 100 V 磁场侧和逻辑侧或光隔离。IC693MDL753的额定输出电流为每点 0.5 安培，每组最大 4 安培，每组公共引脚最大 3 安培。它产生 5.4 安培的浪涌电流持续 10 ms，而导通状态压降为 0.3 VDC。关断状态漏电流为0.1 mA，而两个信号转换的导通和关断响应时间典型值为0.5 ms。IC693MDL753的内部功耗为来自 5 VDC 背板的 260 mA 电源。

该IC693MDL753兼容用作本地 I/O 和分布式 I/O 模块。它可以安装在机箱的任何可用插槽中，指定的 CPU、通信适配器和专用模块插槽除外。IC693MDL753占用单个插槽，可以根据需要安装，但受主机控制器的 I/O 容量和内存的限制。要将电气负载连接到此分立式输出模块，建议IC693CBL315制造商的电缆组件。

Brand: GE Fanuc

Series: 90-30 series

Manufacturer: General Electric Fanuc; Emerson Automation (Current)

Product description Separate output module

Part number: IC693MDL753

Product description: Separate output module

Nooooo. Number of output groups four (4)

Product type: Digital I/O

Number of channels: 32 (32)

Compatibility: GE Fanuc 90-30 PLC

The IC693MDL753 is a digital output module of the 90-30 series Programmable Logic Controller (PLC) series. The module has thirty-two (32) positive logic output channels that produce an output voltage range of 102-28.8 with a nominal voltage of 12-24 VDC. The IC693MDL753 was previously manufactured by GE Fanuc Automation and has now been acquired by Emerson Automation. The module comes specifically with output groupings, four (4) groups of eight (8) outputs each. Each output group has 250 V isolation and 100 V magnetic field side and logic side or optical isolation. The IC693MDL753 has a rated output current of 0.5 amps per point, up to 4 amps per group, and up to 3 amps per group of common pins. It produces a 5.4 amp surge current for 10 ms, while the on-state voltage drop is 0.3 VDC. The off state leakage current is 0.1 mA, while the typical value of the on and off response time of the two signal conversions is 0.5 ms. The IC693MDL753's internal power consumption is 260 mA from a 5-VDC backplane.

The IC693MDL753 is compatible for use as both local and distributed I/O modules. It can be installed in any available slot in the chassis, except for specified CPU, communication adapter, and dedicated module slots. The IC693MDL753 occupies a single slot and can be installed as needed, but is limited by the host controller's I/O capacity and memory. To connect electrical loads to this discrete output module, a cable assembly from the manufacturer IC693CBL315 is recommended.