IC670MDL930K  | 继电器隔离式常开/常闭输出模块   IC670MDL730

品牌GE发那科

系列 现场控制

零件编号 IC670MDL930K

系列 现场 I/O 控制

产品描述 继电器输出模块

通道数 八 （8） 个继电器输出

最大负载电流（电阻式） 每个模块 16 A

从BIU汲取的电流 313毫安

LED指示灯 独立通道 LED;压水堆发光指示灯

开关频率 20 次/分钟

继电器类型： 固定线圈，动臂

触点类型 银合金

当前消耗 313毫安

保护 缓冲器，无保险丝

最大负载电流 2.0 安培，从 5 到 265VAC; 2.0 安培，从 5 到 30VDC; 0.2 安培，31 至 125VDC

最大浪涌 5 安培 20mS

最小负载电流 每点 10 mA

IC670MDL930K 继电器隔离式常开/常闭输出模块在连接大量继电器输出模块时需要BIU提供更多功率。用户必须为由触点驱动的负载提供外部交流或直流电源。每个输出在逻辑侧都有一个 LED 指示灯。该模块提供故障报告功能，以实现高效操作。它具有 8 位离散输出数据，经过处理后可与总线接口模块一起使用。IC670MDL930继电器输出模块必须提供为继电器线圈供电所需的电源。IC670MDL930K该模块的最大负载电流为 2 安培（5 至 265 伏交流电）、2 安培（5 至 30 伏直流电）和 0.2 安培（31 至 125 伏直流电）。它带有带有动式电枢的固定线圈继电器类型。它从总线接口模块电源汲取 313 毫安的最大电流，以便上电。

Brand GE Fanuc

Series field control

Part number IC670MDL930K

Series field I/O control

Product description Relay output module

Number of channels eight (8) relay outputs

Maximum load current (resistive) 16 A per module

The current drawn from the BIU is 313 mah

LED indicator Independent channel LED; Pressurized water reactor light

Switching frequency 20 times/min

Relay type: Fixed coil, boom

Contact type Silver alloy

Current consumption 313 mah

Protective buffer, no fuse

Maximum load current 2.0 amps, from 5 to 265VAC; 2.0 amps, from 5 to 30VDC; 0.2 amps, 31 to 125VDC

Maximum surge 5 amps 20mS

Minimum load current 10 mA per point

The IC670MDL930K relay isolated normally open/Normally closed output module requires more power from the BIU when connecting a large number of relay output modules. The user must provide external AC or DC power for the contact-driven load. Each output has an LED indicator on the logical side. This module provides fault reporting for efficient operation. It has 8-bit discrete output data that can be processed for use with the bus interface module. The IC670MDL930 relay output module must provide the power needed to power the relay coil. IC670MDL930K The module has a maximum load current of 2 amps (5 to 265 volts AC), 2 amps (5 to 30 volts DC) and 0.2 amps (31 to 125 volts DC). It comes with a fixed coil relay type with a moving armature. It draws a maximum current of 313 MA from the bus interface module power supply for power-on.