IC670MDL640  |  离散输入模块  | IC670MDL930

零件编号IC670MDL640

产品描述 离散输入模块

额定电压 24 伏直流电

输入电压范围 0 至 30 伏直流电

不。通道数 十六 （16）

点数 16

输入信号，标称 24 伏直流电

电流（用户输入） 7.5 毫安/点 24 伏直流电

输入信号，量程 0-30 伏直流电

隔离电压 250 伏交流电（连续）/ 1500 伏交流电 1 分钟

输入电流 7.5毫安

该IC670MDL640是GE Fanuc生产的Filed控制系列的一部分。该模块设计用作扩展输入模块，安装在总线接口单元 （BIU） 模块所在的模块上。它带有十六 （16） 个输入通道，支持正负逻辑接线配置。由于支持此类布线配置，该模块适用于不同区域，因为正负逻辑布线利用率有时由特定区域或安装区域内的适用标准决定。

IC670MDL640输入通道设计用于接受 0-30 VDC 的输入信号电压范围，标称电压为 24 VDC，用户输入电流为每点 7.5 mA。该模块的电流消耗为75 mA，来自总线接口单元（BIU）电源，所有输入均处于活动状态，而最大电流消耗为83 mA。

Part number IC670MDL640

Product description Discrete input module

Rated voltage 24 volts DC

Input voltage range 0 to 30 volts DC

Nooooo. Number of channels 16 (16)

Count 16

Input signal, nominal 24 volts DC

Current (user input) 7.5MA/point 24V DC

Input signal, range 0-30 volts DC

Isolation voltage 250 V AC (continuous) / 1500 V AC for 1 minute

Input current 7.5MA

The IC670MDL640 is part of the Filed Control series produced by GE Fanuc. This module is designed to be used as an expansion input module and is mounted on the module where the Bus Interface Unit (BIU) module is located. It comes with sixteen (16) input channels and supports positive and negative logic wiring configurations. Due to the support for such cabling configurations, the module is suitable for different regions, as positive and negative logical cabling utilization is sometimes determined by applicable standards within a particular region or installation area.

The IC670MDL640 input channel is designed to accept an input signal voltage range of 0-30 VDC, with a nominal voltage of 24 VDC and a user input current of 7.5 mA per point. The current consumption of the module is 75 mA from the Bus Interface Unit (BIU) power supply, with all inputs active, while the maximum current consumption is 83 mA.