IC200PWR102J    电源模块  模块接受 120 VAC 标称电压

品牌 ：GE发那科

系列： 万能

产品描述 ：电源模块

制造者 ：GE Fanuc（前）;艾默生自动化 （Current）

输入电压、范围 ：85-132 伏交流电; 176 - 264 伏交流电

零件编号 ：IC200PWR102

系列 VersaMax 的

输入频率 ：47-63赫兹

输入电压 ：120/240 伏交流电

产品类型 ：扩展电源

输出电压 5 伏直流和 3.3 伏直流

输出电压 ：5 伏直流电; 3.3 伏直流电

输入电压范围 85 至 132 VAC（带跳线）; 176-264 VAC （无跳线）

IC200PWR102 是一款扩展电源模块，是 VersaMax 产品系列的一部分。该模块目前由艾默生自动化（前身为 GE 智能平台 （GE IP））制造。它主要用于向 VersaMax 背板供电，安装的模块利用该背板为单个内部电路供电以进行操作。

当连接到提供 85-132 VAC（120 VAC，标称）和 176 - 264 VAC（240 VAC，标称）的外部电源时，IC200PWR102可运行，输入频率范围为 47-63 Hz，输入功率为 27 VA。该电源提供输出电压 5 VDC 和 3.3 VDC，输出电流为 1.0 安培（3.3 VDC）和 1.5 安培（5 VDC），但模块的输出电流不得超过 1.5 安培的总最大输出电流。

IC200PWR102输入电压选择是通过在位于接地端子右侧的两 （2） 个端子上安装跳线来配置的。安装跳线后，模块接受 120 VAC 标称电压，否则，在未安装跳线的情况下，模块的额定电压为 240 VAC，标称值。

Brand: GE Fanuc

Series: Universal

Product Description: Power module

Manufacturer: GE Fanuc (former); Emerson Automation (Current)

Input voltage, range: 85-132 V AC; 176-264 volts AC

Part number: IC200PWR102

Series VersaMax

Input frequency: 47-63 Hz

Input voltage: 120/240 volts AC

Product type: Expansion power supply

Output voltage 5 V DC and 3.3 V DC

Output voltage: 5 volts DC; 3.3 volts DC

Input voltage range 85 to 132 VAC (with jumper); 176-264 VAC (without jumper)

The IC200PWR102 is an expansion power module that is part of the VersaMax product family. The module is currently manufactured by Emerson Automation, formerly GE Intelligent Platform (GE IP). It is primarily used to power the VersaMax backplane, which the installed module uses to power a single internal circuit for operation.

When connected to an external power supply providing 85-132 VAC (120 VAC, nominal) and 176-264 VAC (240 VAC, nominal), the IC200PWR102 operates with an input frequency range of 47-63 Hz and input power of 27 VA. This power supply provides output voltages of 5 VDC and 3.3 VDC, and output currents of 1.0 amps (3.3 VDC) and 1.5 amps (5 VDC), but the output current of the module must not exceed the total maximum output current of 1.5 amps.

The IC200PWR102 input voltage selection is configured by installing jumpers on the two (2) terminals located to the right of the ground terminal. After the jumper is installed, the module accepts a nominal voltage of 120 VAC, otherwise, without the jumper installed, the module is rated at 240 VAC, the nominal value.