IC695CHS012   通用背板  该背板具有 12 个插槽

型号：IC695CHS012

底板选件 :控制器底座和以太网扩展底座

内部电源，3.3 VDC: 600毫安

内部电源，5VDC :240毫安

如何交换支持 :是的

背板支持 ;支持 PCI 和高速串行

尺寸（高x宽x深） :141.4 x 457.2 x 147.3毫米（5.5 x 18 x 5.8英寸）

安装所需的最小间隙 所有侧面 102 毫米（4 英寸）背板

品牌 :GE发那科

IC695CHS012是 PACSystem RX3i 通用背板。该背板具有 12 个插槽，支持高速外设组件互连 （PCI） 和串行总线连接。背板是必要的组件，因为它为 RX3i 模块提供外壳和连接。它还托管通信总线，模块之间发生内部通信。

该IC695CHS012的功耗为 600 mA @ 3.3 VDC 和 240 mA @ 5 VDC。它的物理尺寸为 18.01 x 5.57 x 5.80 （457.5 x 141.5 x 147.32），支持水平安装。它可安装在提供 IP20 / NEMA/UL Type 1 防护等级的外壳内。为了自然冷却并促进足够的空气流通，背板在硬件的所有侧面必须有 102 毫米或 4 英寸的间隙。对于 ATEX 2 区危险区域要求，IC695CHS012必须安装在 IP54 或更高的外壳内，其机械强度可承受 3.5 焦耳的冲击能量。

Baseboard options: Controller base and Ethernet expansion base

Internal power supply, 3.3VDC: 600 mA

Internal power supply, 5VDC :240 MA

How to exchange support: Yes

Backplane support; Supports PCI and high-speed serial

Dimensions (H x W x D) :141.4 x 457.2 x 147.3 mm (5.5 x 18 x 5.8 inches)

Install the required minimum clearance on all sides of the 102 mm (4 in) backplane

Brand :GE Fanuc

The IC695CHS012 is a PACSystem RX3i backplane. The backplane has 12 slots and supports high-speed peripheral component interconnection (PCI) and serial bus connectivity. The backplane is a necessary component because it provides the housing and connections for the RX3i module. It also hosts the communication bus, where internal communication occurs between modules.

The power consumption of the IC695CHS012 is 600 mA@3.3VDC and 240 mA@5VDC. It has physical dimensions of 18.01 x 5.57 x 5.80 (457.5 x 141.5 x 147.32) and supports horizontal installation. It can be installed in a housing offering IP20 / NEMA/UL Type 1 protection. To cool naturally and promote adequate air circulation, the backplane must have a gap of 102 mm or 4 inches on all sides of the hardware. For ATEX Zone 2 hazardous zone requirements, the IC695CHS012 must be installed in an IP54 or higher housing that is mechanically strong enough to withstand 3.5 joules of impact energy.