IC693MDL740H  正逻辑输出模块  电源输出端子

型号：IC693MDL740H

产品描述 ：正逻辑输出模块

ON 响应时间： 最大 2 ms

输出压降： 最大 1 伏

涌流 4.78 安培，：10 ms

每个公共的输出电流 ：2 安培 10 ms

每通道输出电流 ：0.5 安培

不。每组通道数：八 （8） 个通道

IC693MDL740H 额定电压为 12/24 伏直流电，工作电压范围为 12 至 24 伏直流电（+20%、–15%）。该模块的输出特性包括 4.78 安培的浪涌电流（持续 10 ms）、最大输出电压降为 1 VDC、关断状态漏电流为 1 mA、导通响应时间为 2 ms、最大值和 OFF 响应时间为 2 ms。该模块的功耗为 110 mA（所有输出打开），来自背板上的 5 V 总线。

IC693MDL740H模块是 12 至 24 V 直流额定正逻辑输出模块。有 16 个输出点，分为 2 组，每组 8 个，每组有一个通用的电源输出端子。IC693MDL740H模块具有正逻辑特性，可作为用户公共电源总线和正电源总线负载的电流源。输出设备连接在负电源总线和模块输出之间。IC693MDL740H模块与多种负载设备兼容，包括电磁阀和电机起动器。该模块的输出电压范围为 12 至 24 V DC。每个模块点的最大输出电流为 0.5 安培，每个公共点的最大输出电流为 2 安培。最大开机和关机响应时间为 2 毫秒。10 毫秒持续时间的额定浪涌电流为 4.78 安培。

Model: IC693MDL740H

Product description: positive logic output module

ON Response time: Maximum 2 ms

Output voltage drop: 1 V Max

Surge current 4.78 amperes, : 10 ms

Output current per common: 2 amps 10 ms

Output current per channel: 0.5 amp

Nooooo. Number of channels per group: eight (8) channels

The IC693MDL740H has a rated voltage of 12/24 volts DC and an operating voltage range of 12 to 24 volts DC (+20%, -15%). The module's output features include 4.78 amps of inrush current (lasting 10 ms), maximum output voltage drop of 1 VDC, OFF state leakage current of 1 mA, on response time of 2 ms, and maximum and off response time of 2 ms. The power consumption of the module is 110 mA (with all outputs turned on) from the 5 V bus on the backplane.

The IC693MDL740H module is a 12 to 24 V DC rated positive logic output module. There are 16 output points, divided into 2 groups, each group of 8, each group has a common power output terminal. The IC693MDL740H module has positive logic characteristics and can be used as the current source of the user's common power bus and positive power bus load. The output device is connected between the negative power bus and the module output. The IC693MDL740H module is compatible with a variety of load devices, including solenoid valves and motor starters. The module has an output voltage range of 12 to 24 V DC. The maximum output current is 0.5 amps per module point and 2 amps per common point. The maximum startup and shutdown response time is 2 milliseconds. The rated surge current for a duration of 10 milliseconds is 4.78 amps.