IC200ALG320J  模拟输出模块  有助于构建强大且可扩展的控制系统

零件编号 ：IC200ALG320J

类型 :输出模块

输出 :4 个模拟电流源输出

产品描述 :4点模拟电流输出模块

电压 :18 至 30 VDC

接线配置: 单端

电流消耗 :最大 240 mA

该IC200ALG320J是一款模拟输出模块，属于 VersaMax 系列分布式 I/O 模块，以前由 GE Intelligent Platforms 生产，现在隶属于 Emerson Automation。该模块通常用作分布式或远程 I/O 网络的一部分，通常用于大中型控制系统，消除了长时间的信号运行，并有助于构建强大且可扩展的控制系统。

该IC200ALG320J配有四 （4） 个单端模拟输出通道，可产生 4-20 mA 的输出电流信号，分辨率为 4 μA。它特别可用于自动闭环控制系统以及手动控制或开环控制系统，用于模拟信号跟踪设备，如调制阀、阻尼器、百叶窗、定位器、变频驱动器 （VFD） 和类似操作设备。它还可用于信号重传目的，例如提供代表可编程逻辑控制器 （PLC） 中内部计算变量的输出信号，用于端接到信号分配器或信号隔离器、用于本地读出的面板仪表、用于历史化的数据记录器、单环控制器或其他 PLC，以实现级联控制器的先进和复杂架构。

IC200ALG320J 安装了两 （2） 个状态 LED 指示灯，例如 FLD PWR LED 指示现场电源的存在和 OK LED 用于描述背板电源的连续供电。该模块还具有检测用户端电源和可配置输出默认功能，以应对 CPU 停机或模块故障（如保持最后状态或输出降频至 4 mA）。

Part number: IC200ALG320J

Type: Output module

Output :4 analog current source outputs

Product description :4 point analog current output module

Voltage :18 to 30 VDC

Wiring configuration: single end

Current consumption: 240 mA Max

The IC200ALG320J is an analog output module that belongs to the VersaMax family of distributed I/O modules, formerly produced by GE Intelligent Platforms and now owned by Emerson Automation. Typically used as part of a distributed or remote I/O network, the module is typically used in medium to large control systems, eliminating long signal runs and helping to build robust and scalable control systems.

The IC200ALG320J is equipped with four (4) single-ended analog output channels that produce a 4-20 mA output current signal with a resolution of 4 μA. It can especially be used in automatic closed-loop control systems as well as manual or open-loop control systems for analog signal tracking devices such as modulating valves, dampers, blinds, positioners, variable frequency drivers (VFDS) and similar operating devices. It can also be used for signal retransmission purposes, such as providing an output signal that represents the internal calculation variables in a programmable logic controller (PLC), for termination to a signal splitter or signal isolator, panel meters for local readout, data loggers for historization, single-loop controllers, or other PLCS for advanced and complex architectures of cascaded controllers.

The IC200ALG320J is equipped with two (2) status LED indicators, such as the FLD PWR LED to indicate the presence of field power supply and the OK LED to describe continuous power supply from the backplane power supply. The module also has a default function for detecting client power and configurable output in response to CPU downtime or module failure (such as holding the last state or output downfrequency to 4 mA).