参数
型号:IS400JPDHG1ABB-IS410JPDHG1A
额定电压:24 VDC
安全输出电流:2A
触点形式:SPDT(单刀双掷)
反应时间:
接通:<10 ms
断开:<10 ms
符合标准:EN 61508 SIL2,IEC 61508 SIL2
GE IS400JPDHG1ABB和IS410JPDHG1A是用于GE Intelligent Platforms驱动器的安全继电器。它们支持24 VDC电源。
IS400JPDHG1ABB-IS410JPDHG1A安全继电器的工作原理主要包括线圈控制、吸合瞬间、判定故障和断开电源四个步骤。它通常有一个线圈,通过外部控制信号来激活继电器。当线圈得到电流时,会产生一个磁场,使继电器中的触点吸合,从而传递电流。同时,安全继电器内部装有各类保护电路,可以监测电气系统中的电流、电压、温度等参数。一旦监测到异常情况,保护电路会发出故障信号,使安全继电器立即断开电源,以保护电气系统免受故障的影响,防止更严重的事故发生。
IS400JPDHG1ABB-IS410JPDHG1A安全继电器是一种重要的电气控制元件,它通过监测电气系统中的参数来判断是否存在故障,并在发现故障时迅速断开电源,以保护人员和设备的安全。
argument
Model: IS400JPDHG1ABB-IS410JPDHG1A
Rated voltage :24 VDC
Safe output current :2A
Contact form :SPDT(single pole double throw)
Response time:
Connected :<10 ms
Disconnect :<10 ms
Compliance with standards :EN 61508 SIL2, IEC 61508 SIL2
The GE IS400JPDHG1ABB and IS410JPDHG1A are safety relays for GE Intelligent Platforms drivers. They support 24 VDC power supply.
The working principle of IS400JPDHG1ABB-IS410JPDHG1A safety relay mainly includes four steps: coil control, suction moment, fault determination and power disconnection. It usually has a coil that activates the relay via an external control signal. When the coil gets current, it creates a magnetic field that draws the contacts in the relay close, thereby transferring the current. At the same time, the safety relay is equipped with various protection circuits, which can monitor the current, voltage, temperature and other parameters in the electrical system. Once an abnormal situation is detected, the protection circuit will send a fault signal, so that the safety relay is immediately disconnected from the power to protect the electrical system from the impact of the fault and prevent more serious accidents.
IS400JPDHG1ABB-IS410JPDHG1A Safety relay is an important electrical control element, which determines whether there is a fault by monitoring the parameters in the electrical system, and quickly disconnects the power when the fault is found to protect the safety of personnel and equipment.
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33